406oc.co.uk

YAY!!! It Works! - It Buckin' works! It was actually pretty straightforward after all. There was no connection on my car from the clutch switch to the BSI - I wired a connection in to pin 18 on the Yellow 26 way connector on BSI and when grounded it is indeed registered as 'clutch depressed' in para...

Great - Just a quickie re the BSI connection before bed - I'm getting my head around the wiring symbols. . .

26V JN [18] on the BSI means I'm looking for pin 18 on the Yellow 26 way connector right?

Thanks again

Dave

Is that what you mean't by 'testing the other way'?

That's what I was after - Thanks! - I've yet to get Sedre installed I take it from the diag that one side of the clutch switch should be connected to ground (I can test this with meter?) and the other side to BSI (I can test this too). The clutch switch should be working regardless of whether CC is ...

Thanks for getting back! I've had a good trawl through most of the CC posts here and elsewhere - most Retro CC Siemens attempts seem to be on the semi-mux cars and end up getting nowhere because of lack of wiring. I'm probably gonny waste a good chunk of my life pursuing this I know. . . The only th...

Anyone with experience of this? I have connected PP2000 to today and enabled cruise options in BSI & Engine ECU (it's called 'Speed regulation' in the Siemens ECU config). This system uses a single brake and clutch switch as on later full mux 307 etc. All is looking good and I am about to purchase t...