406oc.co.uk

Fixed the problem. Ignition switch was faulty.

Nope, not running with engine running. I pulled antenna wire so hard, that maybe i ripped a connection somewhere underneath..? Also, I have p1519 (coolant blower motor), are these motors supplied with same fuse? Also, MFD displays "Electronic Ignition Fault". Could that be fault code for bad ignitio...

Hello. my car recently produced this kind of error, and I don't know why. When this fault came up, the blower motor stopped working. All buttons and controls on climate control works, rear heated window/side mirrors works, AC also makes sound when button is pressed, all adjusting motors works. But n...

Heya, anybody knows if D8 boot spoiler fits on D9?

Don't be mad at me for flooding my own topic with my own posts, but I'm just trying to add as much info as I can. So another update. When doing a global test, pp2k shows, that engine ecu fault reading was failed. But when going manually to fault reading ecu shows no faults, I can't say that injector...

More updates. I decided to check engine loom wiring and all wiring underneath BSI and fuse box. I found one blue wire ripped off, but don't see where the end might go. Also I noticed same wire in boot, taped in rear left light loom. (pictures attached) Also I forgot to mention, that the car is fitte...

Thank you for wiring diagram, I'll check those wires. I managed to get immobiliser working again, by connecting BSI 26V JN pin #3+pin#15(together) to ECU 48V MR pin#F3. Just like it was connected before. But unfortunately, engine won't start. Immobiliser fault went away, but Injector faults are stil...

Ok. Connected another fully working battery, and made a PP2k scan. I have got some faults, which I attached. "No connection between BSI interface and ECU". As I said earlier, there was a wire connected from the BSI yellow connector, two orange wires connected to a single wire, and fed to the ECU ora...

Bump

Yeah, I was looking for semi-mux 2001 D9. Thank you, trying other ways.

Stewe, can you tell me where you get this wiring harness diagram from? I have Sedre, but never saw diagram like this. It may be helpfull to find bsi pinouts. Thank you

Hi. My battery has been disconnected for around month, I was chopping off the aftermarket alarm system. I reconnected all the original wiring, and now I can't start the car... My car key is single button key, but it is broken, so switch not working. Also, when removing the alarm system, in the bsi c...

Sorry for double posting. I found those wires in another topic in forum. So all I need to do is trace a remote wire(8454) to headunit and splice it to my existing connector (A block, pin number 5). I will power the amp through trailer socket positive wire(20A) which is located near cd changer. Anoth...

Thank you! I have Peugeot Sedre in my laptop, but unfortunately this program can't find some wires. Like BH10C, AH29B, AH22B, XE01C. Maybe somebody can help me identify these wires?

Yes, it is clear about programming HU to car vin. How JBL amp gets power, if I leave standard loom for radio? And does jbl amp has a function, something like remote? Well, actually I am taking apart whole interior right now(because of water ingress through rear tail light :evil: ), so I think I'll m...