406oc.co.uk

It's reasonably simple to change (I've probably made it sound more complicated than it is) You won't get a new mounting bolt with the new arm, so make a good job of cleaning up thread end before trying to remove it. Clean up bolt head whilst still in position then use a sharp chisel and mark edge of...

If you look at maglites photo, look between spring and the red-ringed joint. The track arm is the one coming towards you, it has a horizontal bushed joint on one end which you can see in picture. The other end looks like a "track rod end" but the pin is not tapered and this fastens onto the wheel hu...

Just had this problem, it turned out to be Track arm (couldn,t feel hardly any play with pry bar) but if you bar hub up/down off block of wood on floor then you will hear knock and possibly see play on this knuckle. When removed end connected to hub and barred hub up and down knocking disappears. Pe...

Has anyone experienced noise from the diff. my car has only done 55000 miles but i'm getting a noise which starts at about 30mph right upto 70mph and beyond, I've jacked one of front wheels at a time off ground and run car up to these speeds, noise only comes when drivers wheel is running and passen...

Thanks I'll give that a go.

I didn't think it could be tyres as they were replaced back in october and the noise has started about 3 weeks ago (also noticed by the missus so I can't be hearing things!).

My 406 90bhp HDI 2001 has done 55,000 miles and I have started to notice a noise that appears to be coming from the front of the car but only when I get up to about 60mph, its a sort of droaning type road noise, the tyres were replaced in october last year so i don't think its them. I have knocked i...