406oc.co.uk

to the top

I bought a bleed valve for my sri and have decided to fit it. I connected it to the pipe at the front of the throttle body straight to the actuator, it didnt seem to make any difference no matter how much i adjusted it?! So i then connected it to the pipe on the induction kit, this now gives me to m...

Okay I checked th plugs etc and they are fine, so I squirted wd40 on the inlet and there was a leak at the throttlebody. so took the conversion plate I made up back off and resealed it and bolted it all back up and it is now running better. It does sometimes idle a little high, but if i turn it on a...

You want to fiddle with the plug to the beige squareish lump mounted on the side of the throttle body opposite where the linkage turns Try unplugging it and see if it makes a difference to anything. It should make a huge difference for the worse. If it doesn't, you've likely found your culprit. I h...

what you mean? is that one of the plugs on the throttle body? I have taken them out and they are fine, took it out for abit and the downpipe was glowing red and I wasnt driving fast?!

I fitted the 205 1.9 gti inlet manifold while I was waiting on my new coil pack to arrive, After I fitted the coil pack and inlet I started it up and it idles just below 2000 revs. Can anyone tell me what the problem could be as I have tried everything! Idle control valve is fine.

Thanks

Am in need of anther coil pack for my 2l 8v turbo lump, if anyone has one for sale drop me a pm. Or does anyone know where will be the cheapest place to buy a new one?

Thanks

Chris

just replaced turbo, so got spare in shed. Am in perth aswell which isnt that far. how much you wanting to give me for it?!ha

I dont even know if I am going to do it know, as I was speaking to a guy the other night who had researched it and says the flow is not that great and pretty pointless to do, so he never done it, but then again my mate had it done to his, only thing is that it aint running to see if it feels differe...

Yeah I know that theyr wont be huge gain, but I have got the 1.9 inlet manifold to fit onto it and got offered the cam, so may aswell see what difference it makes. I am going to ecosse at the end of the month to get it rr before i fit the cam, so will be able to see the difference after.

I have a 306 that was a dturbo, then the engine bay went on fire, so decided to do the swap to petrol turbo power, I have had it in for a while now and am slowly tuning the engine, I amn`t looking for huge figures, but a nice quick car. I have been told that the cam from this car fits straight in an...

How much for the brembo calipers?