406oc.co.uk

cant get my key to sync , its been away and had the buttons replaced and the fella assures me that it should only need a re- sync not programing . i have tried all the ways stated in autodata and still no joy . odd thing is one wauy says hold the lock button untill the light goes out , no matter ho...

no idea but tried that and it didn't work

cant get my key to sync , its been away and had the buttons replaced and the fella assures me that it should only need a re- sync not programing . i have tried all the ways stated in autodata and still no joy . odd thing is one wauy says hold the lock button untill the light goes out , no matter how...

robire wrote: My Dad owned it from new. Has 123000 on the clock now

Don't worry fella its the newness of it, as soon as its been run in it will be fine

Thanks for the info me and the multi meter will be outside as soon as the rain stops .
interestingly cant find another hdi110 in any scrap yard within fifty miles , this means either they are all running of not even a scrap yard will touch them

OK sooooo sprayed some carb cleaner down the MAF and its better but still not right, However she is sluggish (slightly ) up to 1800rpm then away she goes pulling like a train then runs out of steam at about 4000 rpm . this i can live with :P Interestingly when i now unplug the MAF it runs exactly th...

Thats what i was wondering , also disconnecting the MAF to see if it sets on default and removes the problem :idea: . I just don't trust the codes as on other cars i have spent a fortune replacing good bits because the fault code said they were duff when in fact it was some other part failing and ca...

Probably more chance of an oscilloscope than either a MAF or TPS.
BTW the throttle position sensor is where the throttle cable loops onto the throttle yes?

And if i don't have an oscilloscope ?

Ok so the pug is sulking , symptoms random lack of power , if you ease of the throttle and gently re apply throttle she will return to full throttle (most times) EM light is on with a code (from memory) of throttle position sensor . My question is with the infamous electrical tomfoolery is this actu...

I have done a search and found the reason for my side airbag light being permanently on is the seat belt pre tensionser plug under my passenger seat . sure enough give all the connector blocks a wiggle off it goes for a day or so . Now my airbag light is flashing so i do another search sure enough s...

Just a quick up date . car took me to work then when i went to park round the back no noise no start
later that day she took me home so then refused to run again
so off to the factors £130 lighter new pump and no problems

Even wiser move don't have a wife
Cheers steve off to the factors on monday for a lift pump then .
thought it was but just needed to check
BTW she has done just over the 140,000 so its due to fail by all posts on here

when i turn the ignition on loud rumble from the back seat area . (wife not in car )
went to start it yesturday silent from the rear wouldn't start .
now i have a loud noise from rear seat area and she starts and runs

So i'm guessing a new lift pump then ?
stupid question but this is the lift pump yes ? not the more expensive high pressure pump .
sorry for stupid questions but i've never worked on a diesel before .