406oc.co.uk

here is a diagram pulled off the internet, the valve its talking about below is the non return valve i think, hopefully its that and not the one in the middle of the servo, usually they dont repair these but just replace the servo. let me know if it solves the problem 8) http://www.buckeyetriumphs....

could anyone tell me if i get the correct stork for my car would it make the mfd work or will it be new clock time

Right hand side of the engine bay mounted on the bulkhead itself, will have the brake fluid tank above it and all the brake pipes out of the master cylinder thats bolted onto the front of it. Looks a bit like a ufo :mrgreen: thanks so is that where the pressure relief/release valve is please as my ...

hi can any one tell me where the brake sevo valve is located please i have a 1.8.petrol d9 99 (t) thanks

hi again could anyone tell me if the mfd is supposed to tell me my mpg etc i have a lx d9 if thats any use and if it is supposed to tell me how do i work it please

thanks had a look at the hoses under pressure no evidence of a leak or a bubble

hi all this topic has probably already been coverd but the brakes on my 406 are really spongy to the point where i dont think they are safe i have done the usual checked pads discs etc drums shoes etc all fine i have bled the system all ok , the brakess are ok at 10-20 mph any higher i am litrally s...

Did the recovery guy tell you which spring it was ?? did he see where it had snapped ?? if you have checked thoroughly and cannot see anything you may have suffered something that occasionally happens with my car, when i park and pull the handbrake on get out and later return and get in the car i h...

no its a 99 if that helps

thanks will look round there tomorrow and will let you know

hi all bit of a strange one i need help with please i was parked up today and got in my car when i heard a bang almost like a handbrake cable snapping but my handbrake is ok i checked it when the recovery guy turned up he said i have a snapped rear spring upon further investigation i cannot find a b...

hi all could you tell me if i fit front fogs in my d9 is the wiring already there for them and how hard it is to fit them and the stalk etc


thanks

steve_earwig wrote:http://www.carlsalter.com/wheel_fitments.html

fantastic link thanks

ok thanks but could with knowing if ie; ford renault wheels etc will fit

hi all this probably has been coverd butr can anyone tell me what the offset of the 406 is and what other car makes fit on ythe 406 as i am going scrapyard tommorow for some more wheels
thanks in advance