406oc.co.uk

Well if you get to them and there is no play between the ball joint and its mount I'd be happy to pay for the post to new zealand plus a little something for your trouble, and have a great Christmas

Thanks for that they have plastic ball joints on the end and just lever off with a screw driver I don't think greasing them would be possible
thanks
anyway

Crankshaft position/speed sensor is on the top of the bell housing right next to the block under the air filter housing, vehicle speed sensor is on the gearbox final drive and MAF sensor is the big sensor just downstream of the air filter housing. cheers

I have had vibration damper failure same sort of symptoms if you look carefully with a torch and you can see swarf down around the pulley area then this can cause the rattle. The other rattle causer I have experienced is the aux drive belt tensioner try sprinkling a bit of talcum powder around the a...

Hi There Can anyone suggest a supplier for gear selector cables for my manual HDI the ball joints under the gear lever are getting worn and reverse is getting harder to select In New Zeland here the local dealers want $1000 NZD /495 quid in your money so I 'm keen to find someone in the UK who can h...

Scanned my engine and found P0220 fault then Found the following on the net although the light is still there maybe I'll leave it Don't suppose anyone knows anything about earthing fault mentioned below?[/color] Thank you, screwloose; the code was P0220 with the message - throttle pedal position swi...

Can anyone tell me where I can get a Throttle position sensor for a 2000 90hp HDI? also I was wondering if anyone new whether or not I need to buy the whole assembly or if it was possible to replace just the potentiometer? cheers

I recently paid someone to change a clutch due to lack of time on my part. Ever since every so often when the engine is hot and usually after a 1/2 hour or so it will fire then die when starting. It is fine when its cold and when its hot if you stop and start it soon after it is ok. I was thinking t...

Can anyone recommend a good scanner for 406 HDI something that you think is useful but not too over the top price wise
cheers