406oc.co.uk

Thank you for that I have a ECU and wiring supplied by an Ebayer that states it is already converted... I am just looking to get my head around the wires etc to decide which i connect to and how i fuse them... I am hoping that the wiring diagrams will give me some deeper understanding I may be makin...

Thank you for that
Sorry I forgot to state I am looking at the D8 version (saloon/estate)

are those diagrams D8 or D9? is there any difference?

Thanks

Steve Are you able to email me a hi res copy of the wiring diagram of the drivers seat and ECU Do you also have one for the Passenger side I have tried to find it on service box and believe i went everywhere but have not found where it is linked... i found a few wiring diagrams under repairs but not...

Hi All thanks for the advice The story has been quite a tour tour one n the end Firstly the cam shaft was broken and valves bent So I elected to find a fully refurbished cylinder head and do the swap I have a mechanic at good rates so all set in order However, th refurnished cylinder arrived and was...

I have just had are furnished cylinder head out on after a timing belt failure Peugeot 406 1.9dt xud9te d8b engine Now after about 50 miles I appeared to lose he vacuum to the braking servo. The mechanic has looked at the system and advises he believes that the wrong cylinder head was provided as th...

Thanks My fingers are crossed Just got to get it from Aberdeen to Edinburgh However, whilst I have t off the road and fiddling fixing the engine does anyone have any good suggestions of what else I should look at and get replaced or done with regard to the engine to ensure I can have this running fo...

Peugeot 406 1.9dt 1996 165k miles Well Today my timing belt snapped. It is 4 years old and 30k miles (I went to have it changed a month ago with my mechanic but we discovered that the last garage to have swapped my timing belt had charged me for a new crank pulley but had never put it in as they had...

So I finally decide to do my first oil change on my. 406 D8 1.9dt. Read the Haynes manual and the advice on here and th n set to work Jacked up the car and got the spanner set out and lo there were two sump plugs one above the other on getting back of the sump....the Haynes manual only shows one.......

can anyone provide guidance on the type of electrical wire to use for making up a wiring harness for electric mirrors, and windows?

thank you

Hi all when I am in gear 3 or 4 and try to downshift to gear 2 or 1 occasionally the gear lever wont go across from 3/4 line into the 1/2 line. I have a 1.9TD 408 mk1 5 gear transmission (think BE3) The clutch feels fine and the gear shift just a little notchy on moving the gear stick Does anyone ha...

For the wires coming from the command stalk

3 and 5 are the wires which increase/decrease speed
1 and 2 are the live feeds from pin 2 of the engagement switch and 4 is the suspend cruise

Here is a guide from another forum on cruise control for D9
I think semi mux!

http://www.peugeotforums.com/forums/mai ... %5D-28067/

enjoy

Okay i have finally got round to try to fit my aftermarket goldcruise cruise control checking what wiring i have, i have the on/off switch wiring on the lower instrument panel!!! But cant find anything else anyway here is a useful link for cruise control in particular the on/off switch wiring http:/...

I am looking at fitting leather seats from a d9 saloon to my D8 LX saloon I have read up on the wiring issues However can anyone confirm if the seats are otherwise interchangeable between the D9 and D8 I understand the front sits are (not withstanding the wiring issues) But I think I have read somew...

Hi all

I have a 406 D8 LX
just missed out on some beige leather seats and door cards owing to poor communication from the seller
Am on the look out for some good condition Beige Leather heated seats and Door Cards

thanks