406oc.co.uk

2003 2.0 HDI 377500 Miles. Gets an oil change every 6k.

Hi Lozz, Thanks for the reply. Nice wheels, but sadly wont fit the 406, well they will but you have to use 20mm spacers, longer wheel bolts etc. There is no rush, it is just a luxury so i can get mine re-furbed and then end up with a set with winter tyres on. Tried a few breakers but they are not ve...

Hi Steve, yes it is No. 2. I have got to fit a rack, there is a slight leak on the top from a union, I have tightened it a couple of times but it still drips. If i tighten it anymore i feel I will strip a thread or crack the rack, then I have to do it quickly. The steering uj has a tight spot but do...

I am after a steering coupling/uj for a 2003 406 2.0 HDI. Mine has a tight spot on it that comes and goes with WD40. The Main Stealer wants over £100 + vat. I have tried all the factors, but no luck. Is anyone out there breaking one, without starship mileage?

Hi all,
I am still trying to locate some 16"Nimrod wheels for a 406. Does anyone know where I can lay my hands on some?
Many thanks.
Will.

Hi Matt, Let me know when you want to shift them and i will let you know if I have located any by then. I assume you need the 15" before you sell the 16", unless you have a spare set kicking around. Its a bit of a luxury as I want them so I can get mine refurbed and then leave a set of winter tyres ...

Hi Jason, Can you see if you can get price & availability on these for me please?. Chassis No. 81620813. I am after the rear under tray, (sh*t shield), there are 2 on the 2.0 HDI. There is a large front one and a smaller rear one. I think it is a 7013H2, but would need that confirmed. Also need 4 X ...

Hi Matt,
Well they certainly are the correct design, but the wrong size tyres for my car. If you are interested in selling them please let me know.
Regards,
Will.

Matt, Can't help you about a stand at the FCS, don't even know what it is, sorry. If you want to sell the wheels please let me know, I would like all the numbers off the back so I can make sure they are the same as what I have. What size tyres have you got on them? Have you thought about 'rolling' t...

I will give him a go. Thanks for the advice.

Will.

Hi Matt. Do you still have the wheels? On the back of the wheels should be some numbers one of which refers to the offset. I think the 206 has an offset of18 and the 406 38 ish, so the 406 wheel on a 206 will foul on the wing and the 206 on the 406 will foul on the inside behind the wheel. Please le...

Thanks for the info Matt. The Ouragan & Nimrod I think are the same but the offset is bigger on the 406. I think i can fit the 206 wheels if I use 20mm spacers and longer bolts.
Thanks again.
Will.

Thanks for the info. I will carry on looking for either. Will

Thanks Gary. It looks like the Ouragan and the Nimrod could be one of the same.

I am after a spare, or 2, 16" Nimrod wheels for a 406 estate 2003. If anyone has any, or ideas where I can get some, please let me know. Thanks. Will