406oc.co.uk

Anyone got one????

Comeon they must be like holdens and fords here in australia, EVERYWHERE!

Flynn wrote:I don't suppose you had any problems with the Bosch fuel pump banjo bolt not fitting inside the Lucas fuel banjo connector did you?

I used the one from the bosch pump, just connected the fuel line to it.

Thanks 750frog, That post of mine is over 2 years old now, but I've been keeping an eye on your progress back home in your Aussie Frogs thread. In addition to that Citroen pump I have sitting in the UK, I've also got a 405 pump on the shelf at home. All just for insurance, but I'll probably never n...

AHA,

Yes mine runs on for a bit, I just tell people it has a turbo timer! LOL.

OK, I will keep looking. There are very few early 406TD's in australia so hoping to get the part from UK???

Cheers.

Thanks for all the help. The 406 STDT didn't have an immobilizer keypad in Australia, although I think that it does detect the correct igntion key. So it could well be that the pump I have pictured above will work. You see the problem is that 405 pumps are now scarce in Australia and the Xantia pum...

OK, So I bought a reco pump listed for a citroen with the 2.1TD motor (XM) in it from dieseljones.co.uk. Postage and part was 700 pounds! Put it on and timed it up. The car went like a bag o shyte! But.... advanced the timing a bit and it goes GREAT! Gonna advance it some more when I get the chance ...

Hi all,

I have recently done the bosch/Lucas conversion on my 1998 406SRDT and the tacho cuts out at 3000 rpm. Looking to get a second hand ECU so the tacho works all the time.

Postage to Sydney Australia with the price.

Cheers, Tim.

[email protected]

As stated,

trick is I need it posted to Sydney Australia. I had a 405TD pump but it is stuffed.

Please email or PM

[email protected]

Cheers!

Good luck in the TriNations, you're gonna need it!

hi folks! Bosch pump, lines and injectors are on, but car doesn't want to start :( The mechanic I've got to do it says he's timed the pump up, but it looks like all he's done is line up the holes in the sprockets and bolt them down so everything was bolted down at TDC, but there's more to it than t...

yeah, I have done all that. just not sure why it will not fire! I assume there is no anti theft stuff on it?

Hi all, I have got the pump from a 1.9 srdt 405 in the car, I have bled up to the injectors however it will not fire. I am wondering if i have the pipes to the injectors on wrong? I have used the same pattern as the 405 motor would use as the pipes from the old lucas pump will not fit. I assume that...

Anyone done this? I need some advice on what pump to get. I already have the injectors from a 1.9TD and all the metal pipes. I know that i will have to make/get the mount for the bosch pump. What else? Pics would be great if you can... ps I am in AUSTRALIA and our diesel sux down here so am planning...

OK, So i took it to an efi place that fault checked the computer. came up with the fuel needle sensor and the pump timing sensor. Cleared the faults, went for a drive till it failed again. Checked the faults and the pump advance sensor was the culprit. A replacement pump in Australia is $3000!!! (bo...

ok,
so i have replaced what i thought was a faulty plug, can i get a new sensor to put in, or do i need to get a whole new injector?

Thanks, Tim.

Sweet, After looking through the forum for about 4 hours i came to a similar conclusion. Thanks so much people. I have to fix the car or I will give it back to the old owner and get my money back... but the car is in such good condition that I really want to keep it.

Cheers,