406oc.co.uk

And he will get it back Fully repaired and working nicely, will be done by end of day tomorrow ready for Steve's arranged thursday pickup. :) Unfortunately I had a delay with my head skimmer and his missus having a baby. Sometimes money is tight and an advance on parts is needed (especially when the...

I didnt know you had a 406 ...

Is the stepper motor (end) still a nice do,e shape or has it worn down? If it's worn down then it's not doing a good enough job.

I can supply and fit you springs. Roughly £240 all in.

What?! My 1.9 405 was last rolling roaded at 124.3bhp and 195ftlb. Since then it was re-tuned and upto approx 130bhp/220 ftlb. Last week i had my MOT had to de-tune. Then re-tuned and it feels roughly 140bhp and 230 ftlb ish. Simple job to tune the 1.9's... fit an 11mm head to the pump from a transi...

Sounds like you need to reset the brains, there's a proceedure for resetting the windows on a megane so i'm sure there's the same proceedude for the laguna. I think it's something like 'both fronts down, then turn ignition on, then wait for both down, then both up for 20 seconds, ignition off then t...

Sounds like you need to reset the brains, there's a proceedure for resetting the windows on a megane so i'm sure there's the same proceedude for the laguna. I think it's something like 'both fronts down, then turn ignition on, then wait for both down, then both up for 20 seconds, ignition off then t...

I remap the 306's (hdi90), have a few maps for the EDC15's... Stage 1, stage 2, stage2 limited torque, stage 2 with 1800bar fps...

Glowplugs :) Try lighting up the glowplug light two or three times before you start. Guarantee it :) Edit... you tried glowplugs. What brand were they? Bosch Duraterms are the winners always and i wouldnt expect any others to last as long. If it's not your glowplugs then you may have air getting int...

Hi Guys. Been a while since I came on here, so busy with work nowadays. I have a full Bosch VE fuel pump setups and all parts needed to convert. This pump is also tuned, LDA modded and Governor modded, on a 2.1 it should see you upto about 150hp and 270ftlb, providing your clutch can hold the power,...

You're welcome Jon.

Next to get all those boost seals replaced! And a bosch conversion eh? ;) hehe

In that case then, id do a new master cylinder before you do a servo.

Sounds like you've got a fluid leak somewhere.

Or massive brake fade.

Lol... good luck finding one of those over here. the only thing i prefer about it is the rear lights! They still make them abroad... Designed in France, it has been manufactured in: Europe: from 1987 to 1997 at Sochaux (France) and Ryton (UK). Zimbabwe: until 2002, by Quest. Egypt: Wagih Abaza produ...

Have you seen Darren J Lobbs Mhdi turbo supercharged beast thing? lol



Sorry if it's a large pic, most forums resize nowadays....