406oc.co.uk

thank you for your reply MJB, however my car doesnt have the internal wiring to power the mirror, hence my question. I have determined that pin 2 is live, but need to determine the earth wire as i only need 2 out the 3 to work, i am a "blackbelt with a soldering iron!" and initially need to clarify ...

Hello 406oc, I have recently purchased a Peugeot 406 interior autodim mirror which has 3 wires, white, black and grey but before i install it and either destroy the mirror or the car would someone please advise me on which of the coloured wire are the live and earth. I am guessing that the remaining...

Hello all in 406oc land, My car went in for the MOT on saturday and failed on a couple of things but an advisory item too, the advisory item being a top level brake light, the unit appears to be sealed and LEDS are soldered to board, however, 4 of the LEDS are now dud. Does anyone have sat in their ...

Hello to you all and thank you for you help, Just for clarity, would the leather seats out of a D8 fit into a D9 without any hassle or do they require "adjustment"? would the D8 leather seats have side airbags that would just plug and play into a D9? I am struggling to find many D9's near to me for ...

Hello Gentlefolk of 406 OC, Whilst moving bits about on my 406 Estate HDi 90 at the weekend to fit an alarm, i found that under the coin holder between the seats, I have 2 other plugs that were blanked off by the coin holder, checking on both doc backup and sedre they are the switches for front heat...

Hello LeeHDI,

I agree that the AL4 is a poor gearbox but I am contemplating manual conversion as diesel AL4 gearboxes seem rare and mega expensive!

I found the problem, despite the bonnet microswitch showing continuity it would not trigger the alarm, I then disconnected the alarm pin switch at its connector shorted the 2 connectors and succesfully triggered the alarm. replacement pin switch required! when i took the old one apart to see if it c...

Hello Folks, Have any of you experienced problems with snow and sport lights flashing on the dashboard courtesy of an AL4 gearbox attached to 1.9 turbo diesel lump XUD, and on selecting either first or reverse the car just revs with very slight momentum and when you have got eventually beyond 10-15m...

just an update, i checked all the terminals in the plugs to clarify earth and live supply's as per Sedre layout and plugged in the siren as removed from a 406 coupe yesterday, left it a few hours to charge up, plugged in the alarm switch/led, connected up the "clone" and tested the alarm led which d...

right then, after doing some research in service box and sedre, I have found the ultrasonic wiring and connector plug, in the footwell, Also I have noted that between the seats i have lifted the coin holder next to the airbag switch and located the the correct blue plug is the ultrasonic cancel/alar...

Hello 406 OC Community and the intelligent folk out there! Having followed some of the threads on this forum site I have a general enquiry regarding BSI's, I have a D9 1999 406 HDi 90 facelift model and recently when looking throught the BSI using PP2000 and the "clone", I noted that some options we...

this is proving to be a very interesting and useful website! Theoretically speaking, I would like to install front fog lights on my D9 (1999 Peugeot 406 HDi 90) and have followed this thread, but my fuse box appears the have 2 relays sockets but looks different to the one in the photo in this topic,...

thanks for your reply's, I'm not after the BSI unit, just the wiring harness for the alarm that unplugs from the BSI and attaches into the alarm loom which then plugs into the BSI. it has to be from texalarm after market install. my brand new alarm does not have the "plug and play" straight into the...

Thank you kind people of 406 OC! Okay then, so to clarify despite being an "early" 1999 (one of the first mark 2 versions) it IS multiplexed even if its not fully multiplexed, so i can't really add anything other that what is dealer designed for the job i.e the suggested main dealer alarm 9671.zk (i...

Hello 406 OC members, I have a 1999 T reg facelift Peugeot 406 HDi (90), I have been trying to work out alarm wiring fitting and setup proceedure (yet to be fitted) but following my research on a number of websites, there appears to be a cut off point before "multiplex" vehicles. Now I am fairly cer...