406oc.co.uk

Yes I will be getting it all striped down sometime this week so will upload some then. Been told this is a common problem on old escorts but I have never seen it before.

Jacked up car today as its not handling very well and the passengers side wheel has a lot of movement from left to right so I thought wishbone bushes and its got a new track rod. Well it seams that the bolts moving not the bush. As any one seen this before were it bolt hole has elongated. I was thin...

Car T-reg 2.0HDI 110 Read my faults the other day and these keep coming back. With engine not running Permanent fault circuit TL4226 faulty. Faulty circuit With engine running Permanent fault. Flowmeter signal. Open circuit or short circuit to earth Intermittent fault. Circuit additional heating 1 o...

Got the clutch changed yesterday not as bad as I thought it would be, Managed to just lower one side of the sub frame to get the box out. The engine mount wasn't that bad either I cut thorough the old one with a jigsaw greased up the new one and taped it in with a big hammer.

I have a mate with a press so should be able to get the mount changed quite easily and I think the dmf is on its way out to so I thought if I'm going to do the clutch I might as well change that too.

Car has only done 90,000 miles but the previous own had been towing a caravan.

Well I'm new to this forum as I got my first 406 last month but I believe the clutch is going so I need of a bit of help. Cars a 1999 T reg 2.0 HDI 110 The car pulls away fine trough all the gears its only when you give it a bit of welly the revs start to go right up but only in 3rd and 4th. I have ...