406oc.co.uk

Pandora, Did you manage to fix your FPR problem? If so what was it? I have a similar problem

Thanks PeterN for the info and link to ebay. Hopefully I will be finished tomorrow. let you know how I get on

PeterN & Gingermagic,

Thanks, its the bigger one that baffles me, even Stealers don't know how or where it goes

I am also at a loss as to what the torque settings are for the 2 bolts that fix the regulator to the Pump body

Thank you all again for your help

Hi PeterN,

Thanks for the info I will wet the seals with Diesel fuel before I connect up. Do you know if there are supposed to be 2 or 3 seals?? I know where the 2 small ones go but is there another larger seal closer to the gasket end.?? (not sure if seals is the correct terminology.)

Hi all,

Looking for a Bosch HP Fuel Regulating Control Valve for my Peugeot 406Hdi 110 2003 saloon to fit


DW10 engine 8B RHZ(F) DYMR 4019920 with Bosch fuel pump and common rail

Thank you

Thank you for your helpful comments I removed the Fuel Filter and examined the fuel housing. No signs of contamination. Removed the HP Regulating Control Valve and removed 2 small rubber washers and gasket. Cleaned with brake cleaner and replaced the small washers. On purchasing from Peugeot Stealer...

Please if anyone can help me it would be really appreciated. I am at the end of my tether with the diagnosis of a fuel problem The car decided to stop without any warning with "Anti Pollution Fault" displayed on the MFD. After removing the key and waiting 10 seconds the car restarted but only ran fo...

Pandora,

I have the same problem with my 406hdi 110 2003

Did you ever get to the bottom of the problem

Charliedog

Yes you can clean it, the o-ring on it is easy to damage. You can get repair kit's on ebay. You need to soak the tip in acetone for one hour min & blow it off with compressed air, there's a tutorial on you tube. The repair kit's about £15 on ebay or you can buy a new valves on ebay for about £70. I...

Many thanks for your letting me know about Kris

I'm afraid not much good with facebook so if you could give him my details I would appreciate it

Thanks again

Thank you for your help, I will let you know how I get on.

Do you know any 406 members who live near Waterlooville in Hampshire who may be able to help?

Grateful

Charliedog

Does anyone know if the Fuel Pump pressure Regulating Valve attached to the HP Fuel Pump on my 406Hdi 110 Rapier 2003 is cleanable/repairable. Also is the Fuel Pressure Sensor cleanable/repairable of do I have to get a new one. Is it located at the right end of the fuel rail as you look into the eng...

I have had this exact problem.

Fault Codes:

P0230
P1112

Any advice and opinions would be appreciated

Thanks

Charliedog

Thanks Highlander for the info, will look into the link you gave. Is it relatively easy to use? I am computer literate. I have seen a video on how to use it. Thanks again