406oc.co.uk

I have a1996 1.9TD that has stopped and the engine will not turn. I changed the timing belt last year and about two months ago it stopped when it was ticking over in the yard. I don't use it, just keep it maintained. Today I took off the cam belt and the cam shaft and it still will not turn except f...

Well, I decided to have another look tonight to see if I could sort the power to the OBD port. Success, fuse 14 10A in engine bay fuse box missing, bingo power to OBD and headlight washers working.

I did one about a year ago and from memory there is two small rectangular wedged that need to be pulled out before the spring clip can be removed. They are very small about 3mm * 4 mm and from memory they are at one end of the clip. Hope this helps

Could be speed sensor on gearbox if its only doing it when the car is moving. Had that issue a few years ago and its an easy fix

I'll have a look the weekend as the weather is bad here tonight. I had a look in the fuse board under the steering wheel but never in the engine compartment.

I have PP2000 but its not great as it came from ebay although it communicates with another 1999 HDI LX that I have in the garage but not with the 2001 110 HDI Executive. The 2001 has a few small issues that I would like to sort but I am unable to make connection with the car. I might buy another PP2...

Thanks for the replies, ya, its probably something to do with the cruise control which I never use. Thought it may have something to do with the OBD port as I seem to have no power supply to the OBD port.

Anyone know what this switch is for next to the diagnostic port.

No problem. Thanks

Hi, I am looking for the heated seats switches, probably the complete unit if you have it that goes under the handbrake. Mine was perfect until i damaged it taking out the centre console.

There is a procedure to be followed when you chance the battery unless you maintain a power source to the car. I suggest you search this forum for the procedure on how to shut down the BSI and restart it again. It may be your problem and worth a try.

Have u still got it as i may be interested.

I done one maybe two plugs on the rear of the engine. It was a pig of a job and from memory i did it from underneath by removing some stuff. Not a nice job !!

Mine is doing the same intermittently for about a year but the engine is not overheating. I need to change the green sensor and take it from there. I read somewhere on this site where the earth wire on the back of the instrument cluster can come loose and cause this problem.

You will need a special brake nut spanner as an open end one will slip. Its basically a ring spanner with a slot to slide over the pipe. Search under brake spanner wrench