hi people my cars coming along nicely alloys came this morning there looking good only 1 tiny problem to solve now
when the car is ticking over it sounds as its ready to cut out as if its misfiring i have changed the rail sensor, intank pump, fuel filter, and shoved some redex through the system i have also bled the system incase any air was through it any ideas what else this could be i want to get this sorted before i book it in to get the stainless straight through put on it
hdi 110 rough tick over
Moderator: Moderators
-
- 2.0 Turbo
- Posts: 273
- Joined: Wed Jun 30, 2010 12:34 pm
- Location: glasgow
-
- 2.0 Turbo
- Posts: 273
- Joined: Wed Jun 30, 2010 12:34 pm
- Location: glasgow
Re: hdi 110 rough tick over
can anybody help 

- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hdi 110 rough tick over
I would say change the MAF but as you've been swapping out parts already to no joy I'd say it's time for some proper diagnostics 

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
- 2.0 Turbo
- Posts: 273
- Joined: Wed Jun 30, 2010 12:34 pm
- Location: glasgow
Re: hdi 110 rough tick over
well stripped the fuel system gave it a good clean also took off the fuel regulator cleaned it out with sum wd40 then went n got a really good injector cleaner and new filter poured the filter housing up with this injector cleaner and put in new filter started car up and its running perfect now