Help

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
threepot
1.8 8v
Posts: 20
Joined: Wed Mar 28, 2012 7:24 pm

Help

Post by threepot »

Hi, I cleaned the maf today,disconnected the battery first,started car and noticed the engine management light on. Car seems to be in limp mode? Can this be easily reset by myself?? Also,watched on youtube how to check egr valve..push up diaphram or whatever its called,put finger over vacuum pipe and it should stay up?? But it springs back down.
dieselink
2.0 16v
Posts: 169
Joined: Mon Apr 16, 2012 3:05 pm

Re: Help

Post by dieselink »

i had same sort of thing happen to me m8,just went for short drive and when i stopped ans restarted car light went out and stayed out,it was like a delay to the ecu,maybe i am wrong,but thats my story m8.
User avatar
Bailes1992
Moderator
Posts: 4292
Joined: Mon Dec 24, 2007 4:13 pm
Location: Bridgend, South Wales

Re: Help

Post by Bailes1992 »

Sounds like you've damaged the MAF to me :|
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
User avatar
lozz
3.0 24v
Posts: 11908
Joined: Thu Oct 07, 2010 10:18 pm
Location: where-ever

Re: Help

Post by lozz »

:arrowu: +1 Maf fubard :(
User avatar
steve_earwig
Moderator
Posts: 19812
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Help

Post by steve_earwig »

Apparently they're quite fragile and easy to damage, which is why I've never cleaned mine. If it's not cleared the light by now then it probably is snafu :( They're expensive but fairly common though.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
threepot
1.8 8v
Posts: 20
Joined: Wed Mar 28, 2012 7:24 pm

Re: Help

Post by threepot »

Well,after a disatrous attempt to clean the maf--use the right stuff guys!!(may have been knackered anyway),i took the car for diagnostic yesterday. Engine light had come on,and was in limp mode. Test picked up 4 faults..egr,turbo boost?,maf,air temp sensor(maf related). Just by chance he had a new maf there! (i*d told him i was coming the previous day..he must have ordered one..clever sod) Anyway,after fitting(Siemens part £75) car runs better,but egr might be an issue?? Knocking/pinking sound? Can these egr be blocked off,without adverse effects? Have read their not really needed. Thanks ps Faulty maf can show a egr problem when its ok?
User avatar
lozz
3.0 24v
Posts: 11908
Joined: Thu Oct 07, 2010 10:18 pm
Location: where-ever

Re: Help

Post by lozz »

just blank it off mate,
and leave solenoid plugged in, shouidnt cause anyproblems that way ishouidnt think,
blanking plates, ive used beer cans, easy enough to cut with scizzors Make template first with cornflakes box ,
Post Reply