406 exe turbo 98, no start , solenoid i think , where is it.
Moderator: Moderators
406 exe turbo 98, no start , solenoid i think , where is it.
Hi all, longtime no see, been a good winter for me baby,
but last week , shes had problems starting,now shes dead, battery seems fine, when i turn the key i just get a clicking noise coming from the engine, if i turn the key all way round , everything works, so dont think its the battery,
prob is from the key switch to the battery.
now ive meaning to buy the manuel for a long time but the local pugwoit dealer want 45 quid, specail manuel , from france they say.
cheers for any help.
i dont even know where the starter motor is , sorry .
but last week , shes had problems starting,now shes dead, battery seems fine, when i turn the key i just get a clicking noise coming from the engine, if i turn the key all way round , everything works, so dont think its the battery,
prob is from the key switch to the battery.
now ive meaning to buy the manuel for a long time but the local pugwoit dealer want 45 quid, specail manuel , from france they say.
cheers for any help.
i dont even know where the starter motor is , sorry .
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
have you tried a new battery?
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
Get a Haynes manual. Don't think there's anything in the Pug manual that you need to know that isn't covered by the Haynes as well, so it's definitely worth the money.
I'd try sticking a multimeter on the end of the lead(s?) to the starter motor and getting someone else to try turning the key (or using a 'max hold' feature if available). Could just be a dodgy relay...
I'd try sticking a multimeter on the end of the lead(s?) to the starter motor and getting someone else to try turning the key (or using a 'max hold' feature if available). Could just be a dodgy relay...
Got a haynes manuel today, usless, for the exec anyway, all models in the manuel say the ignition coil is on top of the cylander head,, i carnt seem to find it,
so was wondering if anyone knew where it was.
and apart from the local pug dealer, and has any one brought one laterly?.,
cheers lads.
rewind, i got a new starter motor, 50 quid,put it on, now the car is turning over, but the engine is not kicking in. it kicked in once, blowing alot of smoke, i guesss thats the spark plugs, ill get them tomo.
ta
so was wondering if anyone knew where it was.
and apart from the local pug dealer, and has any one brought one laterly?.,
cheers lads.
rewind, i got a new starter motor, 50 quid,put it on, now the car is turning over, but the engine is not kicking in. it kicked in once, blowing alot of smoke, i guesss thats the spark plugs, ill get them tomo.
ta
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
right, take one of the plugs out, plug it back in the ht lead, earth the centre electrode on part of the engine, turn the engine over, does it spark?
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
VERY IMPORTANT NOTE
dont touch the plug when your trying to start
dont touch the plug when your trying to start

FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
did you get a spark?
do you have a keypad?
do you have a keypad?
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
if you are getting a spark, then obviously the coils are working
as you dont have a keypad then you wont have an immobiliser problem, usually the double relay is at fault and the fuel pump doesnt run, can you hear it running when you turn the ignition on?

as you dont have a keypad then you wont have an immobiliser problem, usually the double relay is at fault and the fuel pump doesnt run, can you hear it running when you turn the ignition on?
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
the double relay triggers the coils, injectors, ecu and fuel pump, the ecu is working as the coils are working, so you are obviously getting no fuel, lift up the back seat, and get some one to listen to make sure the pump is working whilst trying to start, also listen to the injectors while trying to start and make sure they are ticking loudly, if not they may not be opening which could be caused by the relay
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?
- jameslxdt
- 3.0 24v
- Posts: 2512
- Joined: Wed Apr 26, 2006 9:30 pm
- Location: London, on me bike
- Contact:
you may as well service it yourself as you will save yourself a tidy sum
FAQ - 406 D8 petrol (excl. V6) running and starting problemsPeugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non?