Injector noise / chatter

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

User avatar
Welly
The moderator formally known as Welton
Posts: 15018
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: Injector noise / chatter

Post by Welly »

The injectors operate at 80 Volts - this is the only information I can share :lol: :lol:

Makes sense what you're saying Fly - I always likened the noise to pinking myself and a leaky injector would be the cause of this unwanted occurance (performance will be down too).

Trouble with all this is - just about every single HDi out there seems to make this noise :shock:

Hurry to the scrappies, whilst stocks last :lol:
Cars in my care:

2005 Volvo S40 T5 Force Hail
2017 Hyundai i20 1.4 Pez Auto
2018 Infiniti Q30 1.6T Pez DCT Auto
2010 Renner Twingo
User avatar
steve_earwig
Moderator
Posts: 19708
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Injector noise / chatter

Post by steve_earwig »

Finally, someone that's actually interested. Well done for finding him young maan :cheesy: so, it looks as though the cause was right, just the reason for it was wrong.

I was meant to be going to talk to a Bosch specialist this week some time but I don't think I'll bother now.
FlySpeck wrote:which can be had cheap from france
Care to elaborate? :?
Unskilled meddling sin©e 2007

2004 D9 2.0 HDi 110 Estate lhd VF38ERHZF81657352 - sold but being very well looked after.
1991 Yamaha TDM850 - it's fixed! Shame about the rider...
2008 Toyota Recall4 2.0 VVTI ATM (Anti-Theft Mechanism) LHD JTMBH31V90D007261 - flimsy piece of crap.
1953 Matchless G3LS - it weighs a ton!
FlySpeck
2.0 16v
Posts: 150
Joined: Wed Mar 31, 2010 9:31 pm

Re: Injector noise / chatter

Post by FlySpeck »

yah....I seem to have taken the long way round but im happy its 100% the fault of one injector, but I needed to know exactly what was going on and why.

Also learned that the number in the little box is the injector class number, 1 to 4 - which refers to the injectors "squirtyness" (like that word? lol) or rather denotes the stroke CC's from a bosch table at pressure X. The ecu needs to have the same class of injector so it knows how much fuel it is squirting in for each pulse. i.e. an 044 and 062 would both work if they are both class 2 if you were desperate, but be slightly different spray pattern or some other tiny manufacturing difference, as Bosch are anal about having a unique part no for any difference no matter how small, even if its just to denote that it is fitted to a different car even if its the same exact part under the skin.

ah France yeah....it seems these injectors are readily available and much cheaper in the land of wee-wee than here, so I'll try and source a supplier tonight and post the results ;)
2001 406 HDi 90 LX saloon with moon miles...
lofty
2.2 16v
Posts: 221
Joined: Wed Mar 18, 2009 9:50 am

Re: Injector noise / chatter

Post by lofty »

Interesting work.

Has anyone been brave enough to find out how much new injectors are each at Peugeot?

I assume they are mechanically easy enough to swap over - do they need anythng else doing, ie electronically with diagnostics?
---------------------------------------------------------------------------------------------------
Image
2001 D9 406 Hdi 90bhp Rapier Estate - Platinum Silver
1999 306 GTi-6 Weekend Toy- Astor Grey
User avatar
steve_earwig
Moderator
Posts: 19708
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Injector noise / chatter

Post by steve_earwig »

lofty wrote:Has anyone been brave enough to find out how much new injectors are each at Peugeot?
We already know, more or less - you could buy a whole car for that! :(
Unskilled meddling sin©e 2007

2004 D9 2.0 HDi 110 Estate lhd VF38ERHZF81657352 - sold but being very well looked after.
1991 Yamaha TDM850 - it's fixed! Shame about the rider...
2008 Toyota Recall4 2.0 VVTI ATM (Anti-Theft Mechanism) LHD JTMBH31V90D007261 - flimsy piece of crap.
1953 Matchless G3LS - it weighs a ton!
lofty
2.2 16v
Posts: 221
Joined: Wed Mar 18, 2009 9:50 am

Re: Injector noise / chatter

Post by lofty »

Ha ha - you're right.

Approx £283.24 + vat each....

Gulp.

They list 3 different types for the 90 hdi, either stamped with an X Y or Z.

At that price im happy to let it rattle away to itself. LOL :lol:
---------------------------------------------------------------------------------------------------
Image
2001 D9 406 Hdi 90bhp Rapier Estate - Platinum Silver
1999 306 GTi-6 Weekend Toy- Astor Grey
FlySpeck
2.0 16v
Posts: 150
Joined: Wed Mar 31, 2010 9:31 pm

Re: Injector noise / chatter

Post by FlySpeck »

Ah, yes....pug UK want just under £300 each....**cough cough**

Ebay, from £20 - £45 plus, and no guarantee they are good, as no breaker can test them...my best advice is a scrappy hunt for a cheap set and swap one new one for one old one, cycle all 4 scrappy ones thru the same position until it runs quiet under load. If no change, do the next one etc...

No special conditions for replacing them, just use new copper washers when refitting. If its been running then wait 30 secs after each switch-off till the rail pressure dies away to zero before cracking the fuel couplings open.

and never ever run the engine unless ALL the steel fuel connections are tight again - 24,000 psi leaks can severly injure or blind you. Or worse.

The fuel parts on the system are forged steel to withstand the enormous pressures involved. Your body is mush against such tremendous forces as this badboy can muster, even at idle its around 3000 psi at the injector feed pipes.

When Ford use the pug HDi system (on the TDCi...) they tune each injector to the ecu so they need recoded or it will not run, pug dont do this.
2001 406 HDi 90 LX saloon with moon miles...
ianr2682
Newbie
Posts: 5
Joined: Tue Aug 10, 2010 4:42 pm

Re: Injector noise / chatter

Post by ianr2682 »

Hi, i have been reading this thread as i too was having similar noise symptons on my Relay van 2.0hdi. I have just recently repaired it after cambelt failure. (see other thread)
Anyhow at 2500 rpm i was getting a right clatter from the engine bay. It would start then abruptly stop and then as the revs came back down past 2500 you got a zip type noise.
Turned out it was one of the alternator shield brackets that had broken. Now cable tied in place and no more noise. :)
Wag
1.8 16v
Posts: 69
Joined: Sat Apr 14, 2018 5:04 pm

Re: Injector noise / chatter

Post by Wag »

Can anyone advise where the below mentioned number will be on the injector?
Mines suffering from that clacking sound and it has affected performance when I try to boot it below 3000 rpm. After 3000 it goes off like a rocket.
I've tried to find the number but not sure what I'm looking for, any images will be gratefully recieved.

"it is pinking - its not great to have - swap a second hand injector with each one in turn, matching the injector "class" (2,3,4 etc stamped on the head of the injector) and drive it to see if you have..."
dirtydirtydiesel
3.0 24v
Posts: 1505
Joined: Sun Apr 28, 2013 11:02 pm
Location: Coalville, Leics.

Re: Injector noise / chatter

Post by dirtydirtydiesel »

Holy thread resurrection Batman :cheesy:

It's over 11 years ago Wag & this forum is very quite these day's
You'll probably get more help over on the Facebook group.
2002 110 HDi estate, Rapier in monaco blue! ( found quite a bit more power :cheesy: ) for sale after I've sorted the airbag light :(
1998 3.0 V6 SE coupe in Diablo Red ( my baby ) sold
2006 206 1.4 16v sport in Aegean blue ( wife's shopping trolley :roll: )

2006 BMW e61 535d m-sport :supafrisk: run's for cover :lol:
Wag
1.8 16v
Posts: 69
Joined: Sat Apr 14, 2018 5:04 pm

Re: Injector noise / chatter

Post by Wag »

Yeah, I know, it was worth a shot.
I don't do Facebook.
Any chance of a cut and paste on to here if you see any info please?
Post Reply