The blank slips in on the very left had side, there might be a bracket that holds the inlet up on there too. If your not removing the elbow I would just undo the x2 cap heads and slip it in, oooooeeeer
EGR Blanking question.
Moderator: Moderators
Re: EGR Blanking question.
You will be faced with summit similar to this- 
The blank slips in on the very left had side, there might be a bracket that holds the inlet up on there too. If your not removing the elbow I would just undo the x2 cap heads and slip it in, oooooeeeer
The blank slips in on the very left had side, there might be a bracket that holds the inlet up on there too. If your not removing the elbow I would just undo the x2 cap heads and slip it in, oooooeeeer