oil gathering

[dave406]

Cool so the part should he the same. I'm hitting scrap yards on Friday will try and talk pictures along the way

[steve_earwig]

Further reading

viewtopic.php?f=1&t=21522&p=216719&hili ... pg#p216719

viewtopic.php?f=1&t=22200&p=223909&hili ... pg#p223909

Are you after the non air dozer inlet elbow? It's too small to see it in Doggy's diagram but it's part no. 0382 CT (ooh, there's 2, the NFP one is 0382 L9, well f*ck, it's just a tube )

406
406 NEW
Expert
+ 806 (for the NPF part)

XSARA II
C5 (that's the mk 1)
C4
DISPATCH I & II
+ Synergie for the NFP part

[dave406]

Awesome ordered the blanking plate gonna get the elbow on Friday

[fattail95]

Best of luck! If you have any more questions please ask

Benjamin

[dirtydirtydiesel]

For what it's worth you can just cut the doser valve off with a hack saw .
Remove the butterfly valve from inside the housing .
You need to cut through the spindle / valve (only plastic) to remove it & being carefull to make sure you remove the bushing that the spindle for the butterfly valve run's in before you put the pipe back on (so in dosn't get injested by the engine).
The hole that is left in the pipe from the doser valve can be pluged (like I did with a bung, I have a lathe ) or you could block it up with alraldite or something
simlar, then all you need to do is bung up the vac pipe from it with a M6 bolt & blank off the EGR with a plate or simlar .

Just so you know you have low cost options that work if, A you can't be bothered to look or , B you can't find a 2003 on inlet pipe
Hope this is of some help DDD.

[dave406]

Will the 307 and 207 that had the 2.0 hi also have the same metal elbow?

[steve_earwig]

Er, hold on

406
406 NEW
Expert
+ 806 (for the NPF part)

XSARA II
C5 (that's the mk 1)
C4
DISPATCH I & II
+ Synergie for the NFP part

No,

I don't know if they had intercoolers but they might use something similar, however I can't imagine PSA making 2 parts when one will do.

[dave406]

Engines all had the air doser so brought another and removed the butter fly and plugging the hole pictures to follow

[fattail95]

Well done! Definitely post the pics, will help others I'm sure

[dave406]

So couldn't get to the inlet bolts so just did the doser and... Oil is still coming there any more ideas

Before





After cleans



After 5 mile livey run the puddles are back as in the first picture

[dave406]

O no oil on top now after second cleaning hoever going up a hill i still get buring oil smell but i can rag it and its fine - im so confused

[dave406]

Spoke to pug dealer and they say 5\40bully synth putting 10\40 semi wouldn't cause the leak would it?

[Doggy]

No, I wouldn't have thought so. I ran my HDi 90 on 10/40 semi-synth for over 100k with no issues.

(And yes, I did change it occasionally).

[dave406]

On thursday i'm hiring a ramp. I guess we'll know more. Back of the engine where the exhaust manifold is and hope that this fixtures. I'll keep an eye on top of the engine . Any other suggestions

[dave406]

I have also noticed that oil seems to b e gather on the airdoser side still a tiny bit but still there between the first silver block and the next