Page 1 of 2

Few parts needed

Posted: Fri Mar 12, 2010 9:37 am
by 110wyn
Had mine in the garage yesterday having the belts, water pump, filters & oil changed. A few other things were found while he was on:
Bottom pulley (done), front drop link (ordered), flexi pipe in exhaust (ordered), 2 x CV joints req. to sort EBS prob & a new rear engine mount req.

Still looking at CV joints on internet, but can someone tell me what a rear engine mount looks like? There's all kinds on ebay & i don't want to end up ordering the wrong one (total novice :oops: )

A link or a photo would be much appreciated.

Thanks in advance

Re: Few parts needed

Posted: Fri Mar 12, 2010 9:49 am
by steve_earwig
ANy use? :cheesy:
Image

Re: Few parts needed

Posted: Fri Mar 12, 2010 9:50 am
by Welly
This is an HDi's lower rear mount......

Image

Image

And why they need replacing....
Image

Hope this helps.

Re: Few parts needed

Posted: Fri Mar 12, 2010 9:52 am
by Welly
We should get paid for this stevie, helping this guy within 13 minutes 8)

Re: Few parts needed

Posted: Fri Mar 12, 2010 10:01 am
by puggy
Oooooooh mine was worse than that welly :oops:

Re: Few parts needed

Posted: Fri Mar 12, 2010 10:04 am
by steve_earwig
Welly wrote:We should get paid for this stevie, helping this guy within 13 minutes 8)
I thought that's what we was here for :?

Pug wants about 13 quid for them btw.

Re: Few parts needed

Posted: Fri Mar 12, 2010 10:43 am
by Welly
Yep, £13.00 and a whole lotta trouble fitting the damn thing :cry:

Re: Few parts needed

Posted: Fri Mar 12, 2010 10:47 am
by Welly
puggy wrote:Oooooooh mine was worse than that welly :oops:
Yours has more torques :cheesy:

Tell me puggy, as I don't think people believe me, when you blip the throttle now I bet your engine doesn't move more than about 5mm but with a worn mount it would have lurched forward by at least 40mm.

Re: Few parts needed

Posted: Fri Mar 12, 2010 11:28 am
by puggy
Correct welly !! especially when cold , start up and during tickover you could now
and again feel the whole car lurch , and after a run when you switched off you could
feel the engine lurch again . When i watched this with the bonnet open i would say on occasion
it moved more than 40mm also at say 70/80 on a motorway you could feel it when you
took your foot off . All this has now gone :D

Re: Few parts needed

Posted: Fri Mar 12, 2010 11:50 am
by Welly
It always bothered me about how much the engine was pulling at all pipes and cables when it was moving about so much and yes I used to feel the engine when lifting off - a kinda 'delay'.

Re: Few parts needed

Posted: Fri Mar 12, 2010 12:43 pm
by Doggy
puggy wrote:Oooooooh mine was worse than that welly :oops:
Mine's perfick 8)

Re: Few parts needed

Posted: Fri Mar 12, 2010 12:47 pm
by Welly
dogslife wrote:
puggy wrote:Oooooooh mine was worse than that welly :oops:
Mine's perfick 8)
You must drive it like a pussy :P

Re: Few parts needed

Posted: Fri Mar 12, 2010 12:52 pm
by Doggy
Welly wrote:
dogslife wrote:
puggy wrote:Oooooooh mine was worse than that welly :oops:
Mine's perfick 8)
You must drive it like a pussy :P
Practising for a Volvo :oops:

Re: Few parts needed

Posted: Fri Mar 12, 2010 12:59 pm
by DiscoPol
:arrowu: :arrowu: :arrowu: :arrowu:
Poor Welly and his Vulva.

PMSL

Re: Few parts needed

Posted: Fri Mar 12, 2010 1:33 pm
by 110wyn
Thanks for the replies lads, massive help & much appreciated.