406oc.co.uk

can anyone help im in need of a actuator for my 406 2.0 turbo (petrol)

ive got one kicking around with a good spring, whats wrong with yours?

i keep loosing boost, i've changed the boost control valve so its not that ? and when it does boost it over boosts to just over 1bar (not good) so i need to get to the bottom of this.

sounds like it may be the wastegate sticking, ie sticking open giving low boost, then sticking shut and overboosting, best way to check is to remove to actuator rod from the wastegate (get a new "C" clip first though, unless you know the old one is not corroded as they usually turn to dust when you try and take them off)
The wastegate should open and close easily (feels loose) with your fingers. if its not loose theres your problem, try WD40 to free it off and it should be okay.

i will give that a try next weekend when i get a new c'clip just in case and i will let you know the out come

checked the wastegate the day and its ok it moves no bother,any more idears what it could be

Okay then, how did the actuator feel when you had that off?

if you mean the actuator rod i could'nt move it.

That doesn't sound good you should be able to move it by hand, they are not a particularly strong actuator.

looks like im getting a new one then, i may as well get a forge actuator in its place.

you might have to make your own bracket though. Unless they list one for the 406. But still worth doing as the standard one is pants.

i think i will ring demon tweaks as they have a good range, i will let you know how i get on.