Page 1 of 1

injector question hdi

Posted: Sun Jun 26, 2011 5:10 pm
by BEALEY
is there any difference in the internals if the 90 bhp injectors to the 110 because i had to fit a set of 90 injectors in my 110 when my injectors broke and it seems to be very sluggish ????

Re: injector question hdi

Posted: Sun Jun 26, 2011 6:02 pm
by lozz
There a differnt length so ive been told dunno if thats true.
Id revert back to 110 ones if iwas you, tbh.

Re: injector question hdi

Posted: Sun Jun 26, 2011 10:42 pm
by 406hdi167
they are the same its the same cylinder head for the 90 bhp and the 110bhp

Re: injector question hdi

Posted: Thu Jun 30, 2011 8:13 pm
by leehdi
same engine just a intercooler and different config on the eCU

Re: injector question hdi

Posted: Fri Jul 01, 2011 5:59 pm
by Busman
leehdi wrote:same engine just a intercooler and different config on the eCU
There are a lot more differemces than that. Had mine parked by a 90 the other day, and the longer we looked, the more different bits we saw. Not to mention the gear box and clutch..
Indeed, early and late model HDI 110 are different to. Another mate has a 03 HDI 110 and its quite a lot different to mine under the bonnet. It has some sort of liquid cooled manifold on the rear of the engine, different air con, different alternator, different injector pump. Thats just the bits we could see.

Re: injector question hdi

Posted: Fri Jul 01, 2011 6:56 pm
by leehdi
that on one with FAP tho?

The engine is basically the same though if you exclude the electronics.

Re: injector question hdi

Posted: Fri Jul 01, 2011 7:03 pm
by Busman
leehdi wrote:that on one with FAP tho?

The engine is basically the same though if you exclude the electronics.
The block is the same, but lots of the add on stuff is different. I learnt this the hard way in scrap yards.