406oc.co.uk

Hi All,

I've just removed the head to sort the headgasket, the head gasket has gone between cylinder 2 & 3 and the coolant passage.

Before this I had noticed oil around two of the head bolts (Left hand end/drivers side) and around the injectors etc, towards the left hand end of the head viewed from the front.

There is a ball bearing on one of the oil ways and it appears to be coming from this area, what is the ball bearing and is this a common problem?

Cheers

Chris

Chrissyt wrote:Hi All,

I've just removed the head to sort the headgasket, the head gasket has gone between cylinder 2 & 3 and the coolant passage.

Before this I had noticed oil around two of the head bolts (Left hand end/drivers side) and around the injectors etc, towards the left hand end of the head viewed from the front.

There is a ball bearing on one of the oil ways and it appears to be coming from this area, what is the ball bearing and is this a common problem?

Cheers

Chris

Hi Chris,

I'm afraid I myself am too inexperienced to be of any help, but do you have any pics of these problems?
Particularly of the oil ways and ball bearings?

I wonder whether pictures may help somebody to give you further info.
Out of interest, what symptoms were you seeing prior to the HGF?

Please put up a pic since I may have a feeling I've already dealt with this... I had oil inside the injector wells which was cured by changing the gasket, which was a pain since the bolts were completely flat.