Page 1 of 1
no runner
Posted: Tue Sep 02, 2014 6:05 pm
by dawsondj01
Hi guys and gals.
I jumped in my 406 110 hdi this morning as i do every morning. It turned over and start3d then within a second cut out. Now just cranks.
I got a lift to work. Just got home. Same again. It fires up 1st attempt then dies. And then just cranks.
Checked all the basics but i have no diag machine at home so wondered if anyone has had same issue or know any common problems.
Thanks in advance.
Re: no runner
Posted: Tue Sep 02, 2014 6:35 pm
by steve_earwig
Can you hear the lift pump priming the fuel system?
Re: no runner
Posted: Tue Sep 02, 2014 6:39 pm
by dawsondj01
Yeah seems to be making the same noise it always does.
Re: no runner
Posted: Tue Sep 02, 2014 6:49 pm
by steve_earwig
Ah
I'm afraid lift pump (or the relay that controls it) is about the extent of my knowledge without any diagnostics (damn modern diesels
)
Re: no runner
Posted: Tue Sep 02, 2014 7:14 pm
by dawsondj01
Cheers anyway. Ive spent too much on this car so far. So maybe time for the scrap yard in the sky.
Re: no runner
Posted: Tue Sep 02, 2014 8:11 pm
by D4B
do they have a stop solenoid like the old days? could it be be something like that?
only guessing as I know little about modern diesels either....
Re: no runner
Posted: Tue Sep 02, 2014 9:20 pm
by steve_earwig
Not sure if that was a D8 thing but... on the suspension turret near the ABS unit there should (may be) a red button, they sometimes trip if you go over a bump or something.
Re: no runner
Posted: Wed Sep 03, 2014 6:16 pm
by dawsondj01
Hi dudes. Ive manag3d to get hold of a snap on scanner tonight. Searched the system. Car cranks but does not fire. Only fault in car is
P00c8 after doing a quick google search people are mentioning this fault relates to the bsi unit?
Is this right?
Re: no runner
Posted: Wed Sep 03, 2014 6:42 pm
by steve_earwig
Seems like a lot of generic code readers throw out stuff that's no use to man nor beast. Still, a brief forum search with the code brings up...
Damp carpets -
viewtopic.php?f=3&t=5338&hilit=P00c8+%E2%80%A6&start=15 ->
viewtopic.php?f=10&t=12118
Pipe off the turbo solenoid -
viewtopic.php?f=1&t=10871&p=96756&hilit ... %A6#p96818
And HP pump pressure regulator -
viewtopic.php?f=1&t=12319&p=109406&hili ... A6#p109581
Re: no runner
Posted: Thu Sep 04, 2014 8:07 am
by dawsondj01
Carpets are dry as a bone.
Turbo solenoid pipes are on and in good condition
Will look at fuel pressure this weekend and maybe take the carpets back to check the bsi.
Cheers for the links and information. Will post up what i find.
Re: no runner
Posted: Sat Sep 13, 2014 1:39 pm
by lozz
My guess wouid of been crank sensor.
Re: no runner
Posted: Sat Sep 13, 2014 10:28 pm
by PeterN
The pressure regulator on the HP pump often gives trouble on these.
Peter