Discuss, ask, or get help with engine and mechanical queries in here.
Moderator: Moderators
CrazyPeteUK
1.8 8v
Posts: 23Joined: Sun Jun 19, 2016 5:54 pmLocation: Birmingham, United Kingdom
Post
by CrazyPeteUK Thu Jun 23, 2016 8:08 am
Good morning lovely club members, thank you for your help last time!
I have a new issue now, its on my YouTube account.
Basically my 90 HDI is making a nasty clicking noise at idle and 2.000 rpm.
https://youtu.be/z_USpPegXgM
I assume its the crankshaft pulley as similar Youtubers have the similar noise?
Any help would be generous
Peugeot 406 2.0 HDI Rapier 2000 model. - "My first car" 143000 miles
stevewalsh
2.0 16v
Posts: 123Joined: Wed Apr 21, 2010 10:30 amLocation: SW France
Post
by stevewalsh Thu Jun 23, 2016 9:11 am
Sounds like the crank pulley, you can usually see debris around pulley or undertray
steve_earwig
Moderator
Posts: 19813Joined: Thu Oct 04, 2007 6:09 pmLocation: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Post
by steve_earwig Thu Jun 23, 2016 10:13 am
I think the usual test was to craw a line in Tippex or whatever across the pulley, run the engine, and if the line is no longer straight then the two halves of the pulley have separated (and your engine is living on borrowed time
)
Unskilled meddling sin©e 2007The submitted form was invalid. Try submitting again.
CrazyPeteUK
1.8 8v
Posts: 23Joined: Sun Jun 19, 2016 5:54 pmLocation: Birmingham, United Kingdom
Post
by CrazyPeteUK Thu Jun 23, 2016 3:52 pm
So my guess was right with the YouTubers then.
Thanks for the advise!
Hopefully my car won't be dead soon as I'm due to get her fixed the weekend.
P.s I'm going to be driving alot slower home now
Peugeot 406 2.0 HDI Rapier 2000 model. - "My first car" 143000 miles
)