Page 1 of 1
2.2 HDi additive reset in PP2K
Posted: Mon Oct 10, 2016 10:26 pm
by rwb
How?
Can't find it anywhere!
"PEF Maintenance" looked promising but it wouldn't accept the vehicle mileage.
Anyone know how to do it?
Screenshots here:
http://www.peugeotforums.com/forums/406 ... 2k-237169/
(PNG not allowed on this forum.)
Re: 2.2 HDi additive reset in PP2K
Posted: Mon Oct 10, 2016 10:44 pm
by Doggy
Never tried it on a 407, sorry.
Had a go at a 406 about 5 years ago, but couldn't get it to complete the sequence after you add fuel following the counter reset, (or something like that).
'Ammer an' chisel seem more intuitive somehow.
Re: 2.2 HDi additive reset in PP2K
Posted: Tue Oct 11, 2016 8:04 pm
by rwb
Sorry, this is on a 406
Re: 2.2 HDi additive reset in PP2K
Posted: Wed Oct 12, 2016 5:27 pm
by Doggy
Well in that case, definitely go for the 'ammer an' chisel - you
know it makes sense.
I will try to have a look at the weekend.
Re: 2.2 HDi additive reset in PP2K
Posted: Wed Oct 12, 2016 7:08 pm
by GingerMagic
Every diagnostic I have done on a 406 regarding the additive, has not let me into the ECU - probably with good reason to be honest....
Re: 2.2 HDi additive reset in PP2K
Posted: Wed Oct 12, 2016 8:57 pm
by OllieNZ
GingerMagic wrote:Every diagnostic I have done on a 406 regarding the additive, has not let me into the ECU - probably with good reason to be honest....
Was that after it was mapped out?
I've done on my 307 iirc you had to access the additive ecu and reset it to 0
Re: 2.2 HDi additive reset in PP2K
Posted: Tue Oct 18, 2016 5:34 pm
by Doggy
Sorry, I didn't get to it....
I think Ollie's right, but I can't remember for certain.
Re: 2.2 HDi additive reset in PP2K
Posted: Wed Oct 19, 2016 5:56 pm
by OllieNZ
Doggy wrote:Sorry, I didn't get to it....
I think Ollie's right, but I can't remember for certain.
I can't even go back and check. Since I've had mine dealt with it acknowledges the presence of the ecu but it's there's nothing to access.
I do remember that it was contrary to what you expected to see, so when the additive tank was full it had to be reset to 0