Page 1 of 1
Torque specifications D8 406 Coupe V6 3.0
Posted: Tue Jul 11, 2017 3:25 pm
by hooolagon
Hi I was hoping someone could help me find the torque spec for the 406 Coupe 1998 d8 v6
I'm going to be servicing it; need to know the torque requirements of the:
Oil Sump nut
Brake caliper bolts
Brake slider bolts
Wheel nuts
Spark plugs
Rocker cover gasket bolts
And any others you guys recommend
Much appreciated guys...
regards!
Re: Torque specifications D8 406 Coupe V6 3.0
Posted: Tue Jul 11, 2017 10:31 pm
by dirtydirtydiesel
If you Google it there is a very useful site that pops up with all the torque settings that you need

Re: Torque specifications D8 406 Coupe V6 3.0
Posted: Tue Jul 11, 2017 11:26 pm
by hooolagon
dirtydirtydiesel wrote:If you Google it there is a very useful site that pops up with all the torque settings that you need

Had no luck finding it for the exact model when I googled it, that's why I'm here unfortunately... anyone out there with access to service box or a Haynes manual for the V6? ES9J4?
Ps you missd an 'e' in your signatur
Regards,
Re: Torque specifications D8 406 Coupe V6 3.0
Posted: Tue Jul 11, 2017 11:37 pm
by dirtydirtydiesel
hooolagon wrote:dirtydirtydiesel wrote:If you Google it there is a very useful site that pops up with all the torque settings that you need

Had no luck finding it for the exact model when I googled it, that's why I'm here unfortunately... anyone out there with access to service box or a Haynes manual for the V6? ES9J4?
Ps you missd an 'e' in your signatur
Regards,

Sorry pal but that last comment is lost on me,
I have been working car's & bikes for the last 35 years

, most garages / mechanics I know would not bother with torque settings for the items you mentioned
Brake calipers mounting bolts, F off tight,
Slider bolts pretty tight,
Plugs, hand tight / screw in with wrench until it just bottoms then a quater of a turn, just to compress the sealing washer / 12lbf

Sump bolt, new coper sealing washer, again tighten up until bottoms & a quater of a turn / 18 lbf
Rocker cover bolts, I believe are 6mm into a alloy head so no more than 8 lbf, but have a look over on the coupe club forum
There is a how to on resealing Rocker covers
Hope this is of some help DDD.
Re: Torque specifications D8 406 Coupe V6 3.0
Posted: Tue Jul 11, 2017 11:41 pm
by hooolagon
Haha alright I'll improvise as I'm doing it! Cheers
Leicestershire in your signature is missing an e
Thanks,
Re: Torque specifications D8 406 Coupe V6 3.0
Posted: Tue Jul 11, 2017 11:47 pm
by dirtydirtydiesel
hooolagon wrote:Haha alright I'll improvise as I'm doing it! Cheers
Leicestershire in your signature is missing an e
Thanks,

Thanks for pointing that out, type 'o' missed that one
Missing an e, fixed

,

Probably had one too many 25-30 years ago

Re: Torque specifications D8 406 Coupe V6 3.0
Posted: Wed Jul 12, 2017 12:59 pm
by Doggy
Come to think of it your offer to help people in Leicestershire, (however you spell it), could be seen as discriminatory to people in neighbouring counties.