Timing tool for ew12j4 (2.2i)

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
luqe09
Newbie
Posts: 5
Joined: Sat Dec 01, 2018 5:51 pm

Timing tool for ew12j4 (2.2i)

Post by luqe09 »

Hi folks!

Only one part is missing from my complete timing tool kit for EW12J4: part number is 0189C. This is for flywheel lock.

I would like to ask for dimensions of this part if anyone has that.

I was considering to buy it from store - but the full kit is €200+, and if I need only this one still €50 - so none of them are feasible.

Thank you for any help!
Attachments
image_XXL-106281_1_600x600.jpg
(26.51 KiB) Not downloaded yet
dirtydirtydiesel
3.0 24v
Posts: 1521
Joined: Sun Apr 28, 2013 11:02 pm
Location: Coalville, Leics.

Re: Timing tool for ew12j4 (2.2i)

Post by dirtydirtydiesel »

Can't help with the dimensions but a complete kit including this part is available on ebay for £29.99 :wink:
2002 110 HDi estate, Rapier in monaco blue! ( found quite a bit more power :cheesy: ) SOLD I've sorted the airbag light :cheesy:
1998 3.0 V6 SE coupe in Diablo Red ( my baby ) sold
2006 206 1.4 16v sport in Aegean blue ( wife's shopping trolley :roll: )

2006 BMW e61 535d m-sport :supafrisk: run's for cover :lol:
User avatar
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10710
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: Timing tool for ew12j4 (2.2i)

Post by Doggy »

'wrong end' of an 8mm (I think) drill works fine....
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
luqe09
Newbie
Posts: 5
Joined: Sat Dec 01, 2018 5:51 pm

Re: Timing tool for ew12j4 (2.2i)

Post by luqe09 »

dirtydirtydiesel wrote: Sun Mar 31, 2019 10:25 pm Can't help with the dimensions but a complete kit including this part is available on ebay for £29.99 :wink:
Unfortunately kits around this does not include this 0189C part nr. tool. :( 2.2i (ew12j4 engine quite a rare, I am suffering every time when special tool is needed. :)

On the other I need only the dimensions & 20 min and it's going to be done with turning.

Doggy: yes, the other side of the crankshaft is 8 mm - Haynes manual mentioned that. Thanks!
dirtydirtydiesel
3.0 24v
Posts: 1521
Joined: Sun Apr 28, 2013 11:02 pm
Location: Coalville, Leics.

Re: Timing tool for ew12j4 (2.2i)

Post by dirtydirtydiesel »

Correct me if I'm wrong :?
Your after the part in your attached picture no.

If so have a look at this item no 254057392960.
2002 110 HDi estate, Rapier in monaco blue! ( found quite a bit more power :cheesy: ) SOLD I've sorted the airbag light :cheesy:
1998 3.0 V6 SE coupe in Diablo Red ( my baby ) sold
2006 206 1.4 16v sport in Aegean blue ( wife's shopping trolley :roll: )

2006 BMW e61 535d m-sport :supafrisk: run's for cover :lol:
User avatar
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10710
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: Timing tool for ew12j4 (2.2i)

Post by Doggy »

Last time I did mine, I found there was a small gap between the lower bellhousing cover plate and the block casting, through which you could see a section of the flywheel as you turned the engine. (Car on ramps, lying under the sump, turning crank pulley bolt with a ratchet).
I could see the timing hole passing this opening a few degrees before it aligned the timing hole in the block, apply gentle pressure to your locking pin while slowly rotating the engine and it slips into place.
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
Post Reply