406oc.co.uk

dont know if anyone know's or has done this on this site but with the V6 coupe and V6/2.0L turbo saloon. they have no middle bracket on the exhaust but theres a mounting point for it on the car so when you have an exhaust put on get them to weld a bracket on and bobs you uncle no more drapping or blowing exhaust
bad design on peugeots behalf they know that so much they dont do the exhaust on the turbo now as they get to many warranty jobs in. well my stealer doesnt anyway dont know about others


hope that helps if you didnt know

same with 306's the centre section is just clamped between the backbox (which hangs off 3 rubbers) and the cat (whichs is just clamped to the manifold no other fixings) i plan to add a hanger or two to mine centre section always drops on 306 cabs and then grounds out

yep thats the way it goes on the 6. hanging on the downpipe then all on its own till the back box!
one of the first things i did on my 406. did it to me old mans 6 turbo not so long back after he went thou 3 or 4 exhausts in 3 years!!

I'm looking at replacing my V6s exhaust (still on the original after 60k) with a supersprint mid and rear system. will look into this!