hybris turbo

pug306tdi · Post by **pug306tdi** » Mon Oct 15, 2007 12:19 am

hi all i was wondering does any 1 kno where i can get a hybrid turb for my 406 sri turbo and my 306 diesel turbo?

cheers all

Tiny Tim · Post by **Tiny Tim** » Mon Oct 15, 2007 8:54 am

Any turbo supplier/manufacturer will be able to sort you out, although, unless you've had remaps, it wont really be worth it.

Some names for you to look up on the intraweb:

TurboTechnics
Turbo Developments
Turbo Dynamics
Turbo Centre

Or, just go to http://www.yell.com - tyoe in 'turbo' and the name of your town.

Baz W · Post by **Baz W** » Mon Oct 15, 2007 5:56 pm

I got mine from turbo technics when i had my 306

Tiny Tim · Post by **Tiny Tim** » Mon Oct 15, 2007 6:52 pm

Try Turbo developments (London) and ask for Adam - tell him Tiny Tim sent you

jameslxdt · Post by **jameslxdt** » Mon Oct 15, 2007 7:00 pm

best turbo for a 306 td is either a garret gt15 or KKK KO3, both of which were fitted to the very last T plate 306 and 406 1.9 td, you need the oil supply and return pipe and the turbo to intercooler pipe

pug306tdi · Post by **pug306tdi** » Mon Oct 15, 2007 7:54 pm

i got a t reg 306 i got a t2 turbo atm the 406 has had a remap and the both have had cam work done

mikey s · Post by **mikey s** » Mon Oct 15, 2007 9:27 pm

the garett and the kkk will both be on their efficency limits at about 19 psi. the derv doctor will be able to supply you with a good hybrid upgrade thats capable of around 25 psi.

for your 406 i would look for a 205 turbo technics exhaust manifold as the standard manifold is pants.
this coupled with a t25 blower from a s13 200sx or a t28 blower from a s14a 200sx, will see a healthy power increase.

pug306tdi · Post by **pug306tdi** » Mon Oct 15, 2007 11:35 pm

ok cheers guys i was also wondering will a gti-6 box fit my 406
cheers again guys

nipper76 · Post by **nipper76** » Tue Oct 16, 2007 10:35 am

apparently the answer is yes

as i was looking to see if one would fit mine (2.1td) but being diesel, i was told the ratio would be all wrong, so in your SRI you should have no probs

pug306tdi · Post by **pug306tdi** » Tue Oct 16, 2007 3:29 pm

ok cheers guys for your help

also i can get a gti-6 box to fit my 306 turbo diesel for 400 pound bit much for a gear box tho

Post by **niz406** » Tue Oct 16, 2007 5:10 pm

Or do what I did.......

Build your own... lol

jameslxdt · Post by **jameslxdt** » Tue Oct 16, 2007 6:52 pm

pug306tdi wrote:ok cheers guys i was also wondering will a gti-6 box fit my 406
cheers again guys

yes and no
it will fit, but you need to wind up the rev limiter a hell of a lot, and also 2nd 3rd and 4th gears are too close togther for the turbos torque band

Post by **niz406** » Tue Oct 16, 2007 7:50 pm

jameslxdt wrote:
pug306tdi wrote:ok cheers guys i was also wondering will a gti-6 box fit my 406
cheers again guys
yes and no
it will fit, but you need to wind up the rev limiter a hell of a lot, and also 2nd 3rd and 4th gears are too close togther for the turbos torque band

Will it??? I didn't think it would.... Gets me thinking

nipper76 · Post by **nipper76** » Tue Oct 16, 2007 7:54 pm

build your own G/Box.....

thats gotta be fun

Post by **niz406** » Tue Oct 16, 2007 8:04 pm

nipper76 wrote:build your own G/Box.....

thats gotta be fun

LOL..... I meant Hybrid Turbo

But I can just see it now..... this selector rod goes here..... this sync there...... this pin..... and oh it don't fit back in the box.... lets start again !