406oc.co.uk

hi all i was wondering does any 1 kno where i can get a hybrid turb for my 406 sri turbo and my 306 diesel turbo?

cheers all

Any turbo supplier/manufacturer will be able to sort you out, although, unless you've had remaps, it wont really be worth it.

Some names for you to look up on the intraweb:

TurboTechnics
Turbo Developments
Turbo Dynamics
Turbo Centre

Or, just go to http://www.yell.com - tyoe in 'turbo' and the name of your town.

I got mine from turbo technics when i had my 306

Try Turbo developments (London) and ask for Adam - tell him Tiny Tim sent you

best turbo for a 306 td is either a garret gt15 or KKK KO3, both of which were fitted to the very last T plate 306 and 406 1.9 td, you need the oil supply and return pipe and the turbo to intercooler pipe

i got a t reg 306 i got a t2 turbo atm the 406 has had a remap and the both have had cam work done

the garett and the kkk will both be on their efficency limits at about 19 psi. the derv doctor will be able to supply you with a good hybrid upgrade thats capable of around 25 psi.

for your 406 i would look for a 205 turbo technics exhaust manifold as the standard manifold is pants.
this coupled with a t25 blower from a s13 200sx or a t28 blower from a s14a 200sx, will see a healthy power increase.

ok cheers guys i was also wondering will a gti-6 box fit my 406
cheers again guys

apparently the answer is yes
as i was looking to see if one would fit mine (2.1td) but being diesel, i was told the ratio would be all wrong, so in your SRI you should have no probs

ok cheers guys for your help

also i can get a gti-6 box to fit my 306 turbo diesel for 400 pound bit much for a gear box tho

Or do what I did.......

Build your own... lol

pug306tdi wrote:ok cheers guys i was also wondering will a gti-6 box fit my 406
cheers again guys

yes and no
it will fit, but you need to wind up the rev limiter a hell of a lot, and also 2nd 3rd and 4th gears are too close togther for the turbos torque band

jameslxdt wrote:

pug306tdi wrote:ok cheers guys i was also wondering will a gti-6 box fit my 406
cheers again guys

yes and no
it will fit, but you need to wind up the rev limiter a hell of a lot, and also 2nd 3rd and 4th gears are too close togther for the turbos torque band

Will it??? I didn't think it would.... Gets me thinking

build your own G/Box.....

thats gotta be fun

nipper76 wrote:build your own G/Box.....

thats gotta be fun

LOL..... I meant Hybrid Turbo



But I can just see it now..... this selector rod goes here..... this sync there...... this pin..... and oh it don't fit back in the box.... lets start again !