Page 1 of 1
2.1td into 1.9td
Posted: Wed Mar 05, 2008 8:57 pm
by shelleyamy
Thinking of transplanting the wonderful 2.1td engine from my LX estate (nasty green colour) into a nice excutive estate (nice silver colour) with the 1.9td engine.
Anyone done it?
Mike
Re: 2.1td into 1.9td
Posted: Wed Mar 05, 2008 10:48 pm
by darrenwall
i dont think it can be done cos the main reason is that the engine mountings are in completely different places and the 2.1 has a hydraulic clutch and the 1.9 is cable . hope that helps
Re: 2.1td into 1.9td
Posted: Thu Mar 06, 2008 2:59 pm
by shelleyamy
darrenwall wrote:i dont think it can be done cos the main reason is that the engine mountings are in completely different places and the 2.1 has a hydraulic clutch and the 1.9 is cable . hope that helps
Thanks Darren, wont the "new" engine bay have locating points for all types of the different types of engine mountings? I am thinking that Peugeot wouldn't make different body shells for different types of engine.
I might be wrong about the type of engine in the "new" car, haven't got it yet,just seen a photo, and i am sure i coud see the clutch fluid reservoir on the top left of the bulk head.
I'll try and post the picture.
Re: 2.1td into 1.9td
Posted: Thu Mar 06, 2008 9:35 pm
by shelleyamy
Think it's a petrol.
Re: 2.1td into 1.9td
Posted: Thu Mar 06, 2008 9:49 pm
by shelleyamy
Anyone tell me what engine this is?
[img][IMG]
http://i185.photobucket.com/albums/x132 ... /40619.jpg[/img][/img]
Re: 2.1td into 1.9td
Posted: Thu Mar 06, 2008 9:51 pm
by shelleyamy
Try again

Re: 2.1td into 1.9td
Posted: Thu Mar 06, 2008 10:10 pm
by mjb
I'll give you a clue - you don't want to put diesel in it!
It's an XU10J2TE - a.k.a. 2.0 petrol turbo, a.k.a. "tubby".
Something looks very odd with that picture. Have you got a higher res version? It looks like it's missing the rocker cover! The throttle cable is routed differently to my ex exec turbo too, so i'd hazard a guess at this being an SRi, with that hideous interior (personal taste)
Re: 2.1td into 1.9td
Posted: Fri Mar 07, 2008 8:22 am
by shelleyamy
mjb wrote:I'll give you a clue - you don't want to put diesel in it!
It's an XU10J2TE - a.k.a. 2.0 petrol turbo, a.k.a. "tubby".
Something looks very odd with that picture. Have you got a higher res version? It looks like it's missing the rocker cover! The throttle cable is routed differently to my ex exec turbo too, so i'd hazard a guess at this being an SRi, with that hideous interior (personal taste)
Thanks, that will mean a bigger job to transplant my 2.1td in there then?
Havent got the car yet to check anything missing, here's a picture of the trim, i prefer the none ribbed version myself.
Mike
Re: 2.1td into 1.9td
Posted: Fri Mar 07, 2008 8:24 am
by shelleyamy
Where did that one come from?

Re: 2.1td into 1.9td
Posted: Fri Mar 07, 2008 8:58 pm
by darrenwall
by the look of that last pic id agree with mjb and say its a petrol , there are more than 6 lines on the rev counter and thats all the diesel goes upto , it looks more like the 7 or 8 for a petrol . also it would be way to much work involved swapping a petrol engine for a diesel one , i done it a few years ago in a 405 ( 2.0 l petrol converted to a 1.9 td ) and that was hard work even tho there were only about 9 or 10 wires that needed doing and even then i couldnt get the rev counter or the glow plugs to work properly and i really wouldnt attempt it with the 2.1 cos of the amount of wiring .
couldnt you just swap the interior etc ?
Re: 2.1td into 1.9td
Posted: Fri Mar 07, 2008 9:05 pm
by shelleyamy
darrenwall wrote:
couldnt you just swap the interior etc ?
Yeah think your right,to much work, so i will just have all the leather and toys instead.