Page 1 of 1
hi newbee and need help
Posted: Wed Feb 04, 2009 7:40 am
by ontheroad97
hi i have just bought a p reg 406 1.9td sometimes the indicator light on the dash works sometimes not
sometimes the speedo works other times i have to tap the dash
also are the headlights suppose to stay on when i put my full beam on i didnt think they would
can anybody help e with any of this please.

Re: hi newbee and need help
Posted: Wed Feb 04, 2009 8:13 am
by DaiRees
Hiya mate, welcome to the club.
There's loads of info on here about dodgy connections on the instrument panel, usually dry joints on the PCB. Use the search box on the top right of the page...
Headlights, yup the dips stay on with the main beams because the 406 uses separate bulbs for dips and mains.

If you had a lesser car with one dual filament bulb they'd go off

Re: hi newbee and need help
Posted: Wed Feb 04, 2009 12:34 pm
by teamster1975
Welcome roady!
I've had to resolder two different 406 dash clusters, similar faults as yours and the speedo getting stuck at 40mph

Re: hi newbee and need help
Posted: Wed Feb 04, 2009 1:15 pm
by swiss
Idd, mine'd stick at 38, making the bastardish speed cameras of Southampton just that bit more fun to negotiate
Re-soldering is your friend