Page 1 of 1
2.1 crank pulley
Posted: Wed Mar 18, 2009 4:22 pm
by mark21TD
My crank pulley bolt has come undone and the pulley has worn as well as the woodruff key but the crank seams ok ish, oh it through it's belt aswell
So, where can I get another pulley from, GSF online only show HDI one's, Euro parts say £102
but I'm not paying that if I don't have too and the one in the scappy has allready gone
Is the 1.9 the same or not.
Re: 2.1 crank pulley
Posted: Wed Mar 18, 2009 4:59 pm
by steve_earwig
Ohhh, through = threw
Not according to Service box
Re: 2.1 crank pulley
Posted: Wed Mar 18, 2009 5:34 pm
by mark21TD
Just spocken to the main stealer, £138 inc vat and that with a 15% discount
And I think Euro parts has quoted me for an HDI unit.
Steve you'd never gess I can't spell would you.
Re: 2.1 crank pulley
Posted: Wed Mar 18, 2009 5:52 pm
by steve_earwig
Sorry, I wouldn't have said owt but it took me a while to work out what you meant
I'd think you'd have a hard job getting one off in the breakers.
Re: 2.1 crank pulley
Posted: Wed Mar 18, 2009 6:44 pm
by mark21TD
Getting one off would be easy, finding one is the hard part.
Re: 2.1 crank pulley
Posted: Wed Mar 18, 2009 9:49 pm
by poddack
STROOD FRENCH SPARES (1st Choice)PHONE: 0845 5314407 (Local rate)EMAIL:
[email protected] call between 9am to 5pm Mon to Fri & 10am-1pm Sat PEUGEOT 406 EXECUTIVE DT ESTATE 2088cc (01-02-1998) DIESEL RegNo.: R246 WWO Crankshaft Pulley: £30 3months guarantee [Used] Total price: £30.00 (Excluding Delivery)
Had this problem in January on my Puglet, fitted and working thankyou!
Re: 2.1 crank pulley
Posted: Wed Mar 18, 2009 9:50 pm
by poddack
Oh and get yourself a 2 foot bar to tighten it up with!
Re: 2.1 crank pulley
Posted: Thu Mar 19, 2009 6:18 pm
by mark21TD
Job done and running sweet, I needed it back on the road so dug deep and paid Europarts, done the cam belt as well and replaced the crank oil seal, the aux tentioner looked to have been replaced recently so left it there.
Re: 2.1 crank pulley
Posted: Thu Mar 19, 2009 6:20 pm
by steve_earwig
Nice one, quick job too!
Re: 2.1 crank pulley
Posted: Thu Mar 19, 2009 6:28 pm
by mark21TD
I striped of the cam belt yesterday in about 2 hours and didn't start today untill 2pm but finished it by 5:45, I also swaped back to the old injectors and blocked off the EGR (hamered a 10p into the manifold pipe, it's a realy tight fit
)
All in under 6 hours.
And thats out in the road, no garage for me
Re: 2.1 crank pulley
Posted: Thu Mar 19, 2009 7:20 pm
by totaleclipse
quick work m8, i know access can be a pain on these, but we got the weather for it this week
Re: 2.1 crank pulley
Posted: Thu Mar 19, 2009 7:30 pm
by shelleyamy
Must use thread locking compound,or they will work themselves loose.
Mike
Re: 2.1 crank pulley
Posted: Thu Mar 19, 2009 9:17 pm
by mark21TD
Thread lock used, but whoever did the cambelt last didn't and I paid the price.
What happened to useing lelt handed threads, they never worked loose.