406oc.co.uk

I am gong to be replacing my front brakes but need to a torx for this can anyone tell me what size of torx bit i need, i think it's either 50 or 55, can someone please advise so i know what to buy. It's the rapier saloon if this makes any difference

If you are taking off the caliper bracket to replace the discs, you will need a 55 torx bit, if you are just replacing the pads, you only need a 13mm spanner to undo the bottom bolt holding the caliper down, pull the caliper away and swivel it up, then pull it out of its slot.

If replacing the discs, you'll also require the right size torx bit for the screws which hold the disc to the hub face. Possiby T25?

T30 for the discs