sill rubber door seals?

[johntl]

Ive got a 4 door 406 with usual sill rubber problem , my question is where is the cheapest place to bu the rubbers??

[GingerMagic]

Hi, I got new rubbers recently.

After trawling through eBay I only found one or two and they were £25 + postage, second hand ones are hard to come by.

I eventually went to Peugeot directly, and got them for the same price but without the postage as I picked them up.

Part numbers are;
9023 LJ for the left,
9023 LK for the right.

You will also need some clips, they are only a few pence each ( 6 come with each strip but you need 19 per side in total )
6997 86 is the part number.

Hope this helps....

Kelv.

[johntl]

Thanks for the info , cheers

[RichieD]

This is great info and should be stickied was looking for the part numbers as my new estates rubbers are knackered.

[lisboa]

hello

I need to replace the sill rubbers on my 2002 2.0 HDI 406 estate but I only see references to the parts 9023 LJ and 9023 LK - are these parts the same for both saloon and estate?

Thanks

[GingerMagic]

Yes, the parts are the same for both saloon or estate.
I've only owned estate cars anyway - until I bought the Coupé

[PeterN]

If they are still in one piece you can stick them on with spray on contact adhesive, you need to thoroughly clean the metal surface first, I use meths, not me personally you understand .

Peter

[lisboa]

Thanks for the responses (especially for the meth tip).

They are still in one piece but look the worse for wear (possibly even stretched) so I should probably get a new set. I also have a less than perfect seal at the top of the front passenger door (makes a whistling sound at speed) - initially I thought the door must be misaligned or bent but now i wonder if it's just that the rubber has perished and i need a new set there too.

Thanks again.

[beko1987]

Aha, the thread I need! My drivers one is scrap! Time to see if the part still exists from peugeot in 2018!