Wheres the jack supposed to go?

Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).

Moderator: Moderators

Post Reply
EvilTwin
1.8 16v
Posts: 83
Joined: Thu Aug 27, 2009 11:24 pm

Wheres the jack supposed to go?

Post by EvilTwin »

Another bone question...

Hope this is the right section, no obvious place to put it.

The jack was in a rear footwell when i got it, (obviously not where its supposed to live)

So where does it go? I've tried to fit it in the foam "thing" with all of the other wheel changing tools, but can't seem to find a way of fitting it, and be able to close the hardboard boot floor. Am I barking up the wrong tree, and its supposed to float around loose in the rear footwell? (even with the curious way the french set about engineering design, I cant believe this is where its supposed to live)

BTW, its a D9 estate
Last edited by EvilTwin on Sun Aug 30, 2009 7:08 pm, edited 1 time in total.
'02 406 2.0 HDi Rapier Estate, now with added cruise control!
tenwierdufos
2.0 16v
Posts: 115
Joined: Sun Aug 30, 2009 3:26 pm
Location: Ashbourne, UK
Contact:

Re: Wheres the jack supposed to go?

Post by tenwierdufos »

If its the same as the saloon with a spare wheel under the carpet in the boot they came with a foam moulded mount that sits in the spare wheel which you also put the towing eye in and bar for taking out the wheel nuts :idea:
Image<------------------- GONE :'(
User avatar
Leopold
2.0 16v
Posts: 166
Joined: Sun Jul 19, 2009 10:47 pm
Location: Milton Keynes

Re: Wheres the jack supposed to go?

Post by Leopold »

I'm not sure if its the same as the Saloon as it sits in the middle of the Spare Wheel well. Hope this helps.. :wink:
'99 Peugeot 406 1.8 16v LS in Jade Green
User avatar
steve_earwig
Moderator
Posts: 19812
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Wheres the jack supposed to go?

Post by steve_earwig »

Does this help?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
EvilTwin
1.8 16v
Posts: 83
Joined: Thu Aug 27, 2009 11:24 pm

Re: Wheres the jack supposed to go?

Post by EvilTwin »

Steve that helps a load, was trying to fit it closed up. I'll try again :oops:

Done it now, fitted.
'02 406 2.0 HDi Rapier Estate, now with added cruise control!
Post Reply