406 Saloon & Estate trim same size?

Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).

Moderator: Moderators

Post Reply
User avatar
Jesper
Newbie
Posts: 8
Joined: Wed Aug 17, 2011 9:01 pm
Location: Denmark
Contact:

406 Saloon & Estate trim same size?

Post by Jesper »

Hi,

I need to change the side plastic trims on both sides on my V6 from 2003. The ones with chrome trim. It´s "only" on the front doors and the small ones. I have found some in decent condition at the scrap yard...but from an Estate. Will they fit?

Thanks :)
Image
User avatar
steve_earwig
Moderator
Posts: 19799
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: 406 Saloon & Estate trim same size?

Post by steve_earwig »

Hi there, welcome :cheesy: The panels are the same so.. yep, all the same part numbers, the back doors too.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Jesper
Newbie
Posts: 8
Joined: Wed Aug 17, 2011 9:01 pm
Location: Denmark
Contact:

Re: 406 Saloon & Estate trim same size?

Post by Jesper »

steve_earwig wrote:Hi there, welcome :cheesy: The panels are the same so.. yep, all the same part numbers, the back doors too.
Hi Steve

Thanks a lot :wink: Then I know what I´ll be doing tomorrow :cheesy: Have a great weekend!
Image
User avatar
Jesper
Newbie
Posts: 8
Joined: Wed Aug 17, 2011 9:01 pm
Location: Denmark
Contact:

Re: 406 Saloon & Estate trim same size?

Post by Jesper »

Went and got the trims from the scrapyard and fitted to them my 406. Easy job - pealed off the chrome strips, cleansed them and put on the 'new' ones. £10 for the two small in the front and the ones at the front doors. Cheap fix :D

Thanks for your help Steve :-)
Image
Post Reply