Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).
Moderator: Moderators
Blue406
406 Gimp
Posts: 1147 Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:
Post
by Blue406 » Thu May 22, 2008 7:49 am
My first mod for my coop:
Chrome interior door handles. Half inched from a smashed 04 plate 406 saloon. I couldn't pass up the chance realy, it was the first 406 I've come across on the scrapyard with them, so made short work of removing them.
Fitting them was a little fiddly as I couldn't just go in ham fisted and break things like I did when removing them.
Welly
The moderator formally known as Welton
Posts: 15033 Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire
Post
by Welly » Thu May 22, 2008 8:03 am
And very nice too. I feel sorry for anyone who jumps in that scrapper 406 and closes the door
Bluey - that's a strange design detail under the door grab handle there's a black plastic stopper
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Blue406
406 Gimp
Posts: 1147 Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:
Post
by Blue406 » Thu May 22, 2008 8:59 am
Yes, it is.
Limitations of design I think. Theres a bolt there that secures the door card to a bracket, much like on the saloon/estate versions.
I'm thinking of getting grey stoppers and maybe making happy with model paints to kinda camouflage them.
jimmartin1
2.0 16v
Posts: 119 Joined: Mon Apr 28, 2008 10:10 pm
Post
by jimmartin1 » Mon May 26, 2008 7:22 pm
I can get the hold of a full set of them handles if anyone is interested?????
STALLED
The moderator down under
Posts: 1175 Joined: Sat Jan 06, 2007 6:26 am
Location: Syd - Aus
Post
by STALLED » Sun Jun 01, 2008 2:54 am
Looks tops!!!
1997 406 D8 ST Manual 2.0L!
BigGav75
1.8 16v
Posts: 86 Joined: Wed May 20, 2009 10:55 pm
Location: Portglenone. Co.Antrim
Post
by BigGav75 » Wed Jun 24, 2009 11:10 pm
jimmartin1 wrote: I can get the hold of a full set of them handles if anyone is interested?????
do u still have the handles?
eoin27
The Irish 406 addict
Posts: 1131 Joined: Fri Nov 30, 2007 2:18 pm
Location: Dublin, Ireland
Post
by eoin27 » Thu Jun 25, 2009 12:02 am
Another suggestion is the D9 rear door handles(manual windows). They look like they would fit in there and they are smooth black handles.
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
jameslunt
1.8 16v
Posts: 54 Joined: Mon Feb 12, 2007 12:03 am
Location: Shropshire
Post
by jameslunt » Sun Jul 05, 2009 5:04 pm
ive done the same in my D9 exec estate, does look alot better than the black handles, even with the wood trim as the heater vents has the chrome accents on the sliders.
all im looking for now is the chrome rings to go round the speedo dials and will be sorted, and yes i am keeping the fake wood as i think it looks better than the chrome ish dash and dor card trims.
steve_earwig
Moderator
Posts: 19812 Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Post
by steve_earwig » Sun Jul 05, 2009 5:41 pm
I dunno if it's the same for after-market chrome rings but on my real ones, when the lights are on and fuel gauge points straight up it reflects off the perspex back on to the chrome and thence into my eyes, so for a while I get a bright light in the middle of the dash - "wassat? Oh." 5 minutes later "wassat?? Oh." etc.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
Blue406
406 Gimp
Posts: 1147 Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:
Post
by Blue406 » Fri Jul 17, 2009 3:10 pm
You silly bugger!
Just a quick note: I recently upgraded from the cloth interior to tan leather.
Piccies soon.
Welly
The moderator formally known as Welton
Posts: 15033 Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire
Post
by Welly » Fri Jul 17, 2009 3:39 pm
Tan levver eh? that's very cool
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Blue406
406 Gimp
Posts: 1147 Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:
Post
by Blue406 » Fri Jul 17, 2009 5:08 pm
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10710 Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants
Post
by Doggy » Sat Jul 18, 2009 9:26 am
Very nice.
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6 -speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
DaiRees
Site Admin
Posts: 5377 Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)
Post
by DaiRees » Sat Jul 18, 2009 9:50 am
Playtime_Fontayne wrote: "Dai Rees Supplier of Fine Automobilia. Established 2007"
Blue406
406 Gimp
Posts: 1147 Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:
Post
by Blue406 » Thu Jul 23, 2009 10:40 am
LOL!
I've been at it again. I just swapped the dash inserts from the matt grey to the ashwood effect from the "Silver and Black" edition coupe.
Very nice
Pics to follow