406oc.co.uk

Here is a tester for all you folks, i bought a set of halfords roofbars of ebay for my D9 406, when i came to fit them the holes on the roofbar fixings do not line up to the holes in the 406 under the seal. The 2 holes on the brackets are 20mm centre to centre but the holes on my 406 are 45mm centre to centre. The only thing i can think of is maybe the older D8 406 holes for the roofbars were 20mm centres and this is the roofbars i have got. Can anyone be kind enough with the D8 406 saloon to go out and measure the distance between the holes ...Thanks Colin

I just had a look at the roof parts diagrams on Service Box and they're the same parts D8 & 9, however the bit where you can see all the accessories like roof bars seems to be missing

steve_earwig wrote:I just had a look at the roof parts diagrams on Service Box and they're the same parts D8 & 9, however the bit where you can see all the accessories like roof bars seems to be missing

Thanks anyway Steve, Hopefully someone will go out and look at there D8 and let me know the measurements....Cheers Colin