Page 1 of 3

My 406 2.1TD

Posted: Mon Feb 13, 2012 3:13 pm
by jonsowman
Hi all,

Thought it was about time I posted some pictures. They're just from phone camera until I can get some better ones, so apologies for that. Here goes:

1998 R reg, currently just over 210k miles.

Image
Image
Image
Image
Image
Image

Has been an excellent reliable runner, very pleased with it.

8)

Re: My 406 2.1TD

Posted: Mon Feb 13, 2012 5:43 pm
by Gary406
looks very tidy for year / milage mate.

maybe colour code those wing mirrors ?

Re: My 406 2.1TD

Posted: Mon Feb 13, 2012 11:02 pm
by Doggy
Very smart & well looked after. 8)

Re: My 406 2.1TD

Posted: Mon Feb 13, 2012 11:34 pm
by midsmike
is that a lx i wish my lx looked that gd i lent it to my dads mate and he's just hit a skip and rit it off ill up load pics soon so u can all see

Re: My 406 2.1TD

Posted: Tue Feb 14, 2012 8:32 am
by jonsowman
Thanks guys :)

Gary, I've been thinking about it but I'm not at all skilled with spray paints and I'm concerned I'd ruin it. Also Regency Red seems a difficult one to get hold of, I've never seen another 406 in this colour!

midsmike, yep it's an LX. But I've retrofitted a trip computer if that was what's confusing you.

Re: My 406 2.1TD

Posted: Tue Feb 14, 2012 8:59 am
by highlander
jonsowman wrote:Regency Red
What's your paint code? Should be a four-character code that will have been spray-painted (in the factory) on to one of your suspension turrets under the bonnet.

Re: My 406 2.1TD

Posted: Tue Feb 14, 2012 11:03 am
by gumby6371
I was considering colour coding the mirrors on my LX, my plan was to nab a pair of front covers from the breakers and spray them up. That way if you make a complete balls up you just bin them.
The front covers are really easy to remove, just fold the mirrors in and you'll see a release catch, prod a screwdriver in and pop them off.

I can't imagine paying more than a couple of quid at the breakers and a few rattle cans wont cost the earth and will come in handy for touch ups in the future.

If you get ones that are already painted you wont need to worry about the primer bonding to plastic.

Re: My 406 2.1TD

Posted: Tue Feb 14, 2012 12:41 pm
by jonsowman
The paint code on the suspension turret is P0JZ. The car is listed as Regency Red in the original receipt from the Peugeot dealer.

Good advice on getting some already painted mirror backs from a scrappy, will try and hunt some down. I haven't managed to find any spray paint of the correct colour yet though.

Re: My 406 2.1TD

Posted: Tue Feb 14, 2012 7:29 pm
by midsmike
my lx is the same colour and its a 2.1

Re: My 406 2.1TD

Posted: Tue Feb 14, 2012 7:45 pm
by Gary406
jonsowman wrote:The paint code on the suspension turret is P0JZ. The car is listed as Regency Red in the original receipt from the Peugeot dealer.

Good advice on getting some already painted mirror backs from a scrappy, will try and hunt some down. I haven't managed to find any spray paint of the correct colour yet though.
any proper car paint shop will mix that paint up without any problems at all....

http://www.wigancarpaints.co.uk/ :arrowl: :arrowl: ring these if you dont have a paint shop down there. these guys are brilliant and have been running this same shop many years .
im sure they will post stuff to you if you pay over the phone with your card. you have my word its a well established shop in wigan.

just give them the code and they will mix the colour up and put it into a tin for you 8)

Re: My 406 2.1TD

Posted: Wed Feb 15, 2012 8:43 pm
by jonsowman
Nice one Gary, thank you. I'll get onto finding some mirror backs...

Re: My 406 2.1TD

Posted: Sat Jun 16, 2012 5:39 pm
by jonsowman
Got all the lower dash panels in black from an HDi at a scrappie today. Here's the driver's side:
Image

You'll note the yellow cable tie until I sort out a proper fastener, since the D8 and D9 ones don't match in that corner. I'll drill it and stick a screw through there soon.

Passenger side glovebox surround is fitted, but I broke the new glovebox hinge as I was putting it in :( So I've got a new one coming.

Edit: also got D9 air vents

Re: My 406 2.1TD

Posted: Wed Jun 20, 2012 4:22 pm
by jonsowman
Glovebox changed to black:
Image

Got myself a leather interior from a local breaker as well. Fantastic condition, hardly a mark on them (until I got my mitts on them). Full leather electric heated seats (with complete loom & ECU) and exec parcel shelf for £120, not too bad I didn't think.

I didn't bother documenting this too much as others have already done so (thanks a lot, your pics/advice helped loads).

Back seats were easy:
Image

Changed the pre-tensioners and wiring for them over from the original seats:
Image

Passenger seat out and sorting out wiring for the electric seats:
Image

And driver's side
Image

I didn't want to bother with memory and the ECU faff, so I bypassed it and wired the switches directly to the motors:
Image

And grounded the two free pads on the seat switch unit:
Image

Centre console going back in
Image

Done!
Image
Image
Image
Image

Re: My 406 2.1TD

Posted: Wed Jun 20, 2012 4:26 pm
by Irish406
wow those front leather seats really look the bizz...Class job...might add to the growing 'to do' list :D

Re: My 406 2.1TD

Posted: Wed Jun 20, 2012 5:47 pm
by midsmike
looking gd mate you should of come to the french car show would of been gd to see ur car and wat u have done to it all you need now id new door cards and paint ur parcel shelf and a b c pillers matt black they look so much better ive done mine ill put pics up later look out for my topic