Project All Smoke, No Poke :)
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Project All Smoke, No Poke :)
This is my 1998 D8 406 Dturbo L.
It's the 1.9TD 90bhp Semi-Ecu Controlled Model.
First thing I did when I got it was clean the inside, you can see why
And finished after about 6 hours
Only exterior shot I got at the moment...
New Speakers were fitted...
Anyway then my Mum used it for a week or so because her focus threw a rod.
Bearing in mind I turned 17 2 weeks ago and this is my first car I think it's pretty good, although abit weird. But I've never been normal?
Now I'm tempted to completly rat look the thing on the outside but I'm a detailer and I couldnt live with a rat'd car no matter how cool it'd look.
Now Quinn direct don't charge for any modification other than ones that up the power significantly which I was glad to hear
Now I thought the wooden dash and random grey bits of plastic looked abit old and 90's so I sprayed the greay plastics matt black and sprayed the wood silver. So far only the drivers sides been done
So got an induction kit on the thing...
It dumps back through the intake Sounds pretty cool I sat at a traffic light in it today and just blipped the throttle just to hear it dump lol.
There was also a traffic master button that didn't work so I ripped the system out...
I started using Millers sport four and for the first 100 odd miles there was loads of smoke which did this to my drive...
After a second dose the smokes calmed down, the car is much smoother, abit more responsive and much quieter.
Give my fuelpump a good scrub today and deoxidised it...
Fitte George...
Well didn't know what to do for the cold airfeed for my induction kit... so for now I've got this...
And thats pretty much where it stands.
Got other things I need to do.
Need to sort out my issue with the indicators as I really can't drive the car without them and they keep smoking
Engine mounts are pretty shagged and casuign me to struggle into third.
Got new alloys for it, need to get them refurbed and tyres.
Polybushes, Eibach Springs, OEM shocks, strut braces to stiffen it up abit.
New interior.
New stereo and got an amp and sub to go in.
Think I'l leave it then, might get a stage one done on the engine next year but 90hp is pleanty for me atm
Thanks for reading, all comments and constructive critism greatfully recived.
Bailes.
It's the 1.9TD 90bhp Semi-Ecu Controlled Model.
First thing I did when I got it was clean the inside, you can see why
And finished after about 6 hours
Only exterior shot I got at the moment...
New Speakers were fitted...
Anyway then my Mum used it for a week or so because her focus threw a rod.
Bearing in mind I turned 17 2 weeks ago and this is my first car I think it's pretty good, although abit weird. But I've never been normal?
Now I'm tempted to completly rat look the thing on the outside but I'm a detailer and I couldnt live with a rat'd car no matter how cool it'd look.
Now Quinn direct don't charge for any modification other than ones that up the power significantly which I was glad to hear
Now I thought the wooden dash and random grey bits of plastic looked abit old and 90's so I sprayed the greay plastics matt black and sprayed the wood silver. So far only the drivers sides been done
So got an induction kit on the thing...
It dumps back through the intake Sounds pretty cool I sat at a traffic light in it today and just blipped the throttle just to hear it dump lol.
There was also a traffic master button that didn't work so I ripped the system out...
I started using Millers sport four and for the first 100 odd miles there was loads of smoke which did this to my drive...
After a second dose the smokes calmed down, the car is much smoother, abit more responsive and much quieter.
Give my fuelpump a good scrub today and deoxidised it...
Fitte George...
Well didn't know what to do for the cold airfeed for my induction kit... so for now I've got this...
And thats pretty much where it stands.
Got other things I need to do.
Need to sort out my issue with the indicators as I really can't drive the car without them and they keep smoking
Engine mounts are pretty shagged and casuign me to struggle into third.
Got new alloys for it, need to get them refurbed and tyres.
Polybushes, Eibach Springs, OEM shocks, strut braces to stiffen it up abit.
New interior.
New stereo and got an amp and sub to go in.
Think I'l leave it then, might get a stage one done on the engine next year but 90hp is pleanty for me atm
Thanks for reading, all comments and constructive critism greatfully recived.
Bailes.
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
Re: Project All Smoke, No Poke :)
You have no ABS??????
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Project All Smoke, No Poke :)
How'd you know that?mjb wrote:You have no ABS??????
I'm tempted to slam it on now to find out
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
Re: Project All Smoke, No Poke :)
You have no visible ABS pump/solenoid block (some black box with green connectors underneath where it should be), and 4 brake pipes coming out of your master cylinder all heading back towards the bulkhead
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
- Captain Jack
- 3.0 24v
- Posts: 3820
- Joined: Sun Aug 07, 2005 11:26 am
- Location: Langford, Somerset
Re: Project All Smoke, No Poke :)
The earliest poverty spec models didn't come with ABS...
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp )
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp )
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Project All Smoke, No Poke :)
I don't think I'l have this long. Hopfully I can have my Uncles HDi Rapier.
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
Re: Project All Smoke, No Poke :)
when you change the radio, use 2 nuts on each arm thingy. mine kept having a tendancy to work themselves loose, which was quite annoying!
The answers no!
Now whats the question?
Now whats the question?
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Project All Smoke, No Poke :)
I'd like to know ho to get the radio out. I've tried two screw drivers and it wouldnt budge and the keys I have for my Mums car are for radio's with two holes on each side.mav wrote:when you change the radio, use 2 nuts on each arm thingy. mine kept having a tendancy to work themselves loose, which was quite annoying!
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
- steve_earwig
- Moderator
- Posts: 19811
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Project All Smoke, No Poke :)
I used 2 knitting needles on mine
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Project All Smoke, No Poke :)
Must be small knitting needlessteve_earwig wrote:I used 2 knitting needles on mine
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
- steve_earwig
- Moderator
- Posts: 19811
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Project All Smoke, No Poke :)
Hmm, yours looks like some sort of Clarion, maybe a pic would help...
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Project All Smoke, No Poke :)
It's a Phillips 4030steve_earwig wrote:Hmm, yours looks like some sort of Clarion, maybe a pic would help...
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
- steve_earwig
- Moderator
- Posts: 19811
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Project All Smoke, No Poke :)
Nope, can't find anything useful online, the only philips removal tools I can find for sale look like this:
Maybe someone else has one and can help you "out" with it.
Maybe someone else has one and can help you "out" with it.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- Bailes1992
- Moderator
- Posts: 4292
- Joined: Mon Dec 24, 2007 4:13 pm
- Location: Bridgend, South Wales
Re: Project All Smoke, No Poke :)
I'm thinking about snapping a key I have and trying to use both ends of that.steve_earwig wrote:Nope, can't find anything useful online, the only philips removal tools I can find for sale look like this:
Maybe someone else has one and can help you "out" with it.
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
Re: Project All Smoke, No Poke :)
Interesting project.
Similar to the wifes car.
She is not a fan of the wood either. How do the the fake wood panels come out?
How did you find that Millers stuff?
Similar to the wifes car.
She is not a fan of the wood either. How do the the fake wood panels come out?
How did you find that Millers stuff?
His: 1990 Volkswagen Golf II 1.8 GTi 8v.
Hers: 2000 "W" 406 Estate GLX HDi 90 (Bosch) @ 150k
http://www.gsdoc.co.uk German Shepherd Dog Owners Club
Hers: 2000 "W" 406 Estate GLX HDi 90 (Bosch) @ 150k
http://www.gsdoc.co.uk German Shepherd Dog Owners Club