Which wheels fit saloons with Brembos?

Shocks, springs, anything to do with the running gear

Moderator: Moderators

Post Reply
MikeBX16V
1.8 8v
Posts: 49
Joined: Tue Mar 17, 2009 10:23 pm

Which wheels fit saloons with Brembos?

Post by MikeBX16V »

Hi,

I expect they must be at least 16", and have the correct offset of around 20. To fit 205-55x16 tyres

The coupes have an offset of about 14.

But which from the Peugeot range fit properly?

thanks,

Mike
GingerMagic
3.0 24v
Posts: 3579
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: Which wheels fit saloons with Brembos?

Post by GingerMagic »

The Starfish coupe wheels fit, as do the coupe Hoggars.

Both of these are 16" with the correct offset - no spacers required.
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
pug406nz
1.8 16v
Posts: 93
Joined: Thu Jul 25, 2013 8:01 am

Re: Which wheels fit saloons with Brembos?

Post by pug406nz »

Keep in mind, its not offset that clears brembos, as you can have a very low or negative offset and still not clear Brembos. Its about the distance from the mounting point to the spokes.
MikeBX16V
1.8 8v
Posts: 49
Joined: Tue Mar 17, 2009 10:23 pm

Re: Which wheels fit saloons with Brembos?

Post by MikeBX16V »

Don't the coupe wheels have a different offset from the saloon, which could stress the bearings?
GingerMagic
3.0 24v
Posts: 3579
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: Which wheels fit saloons with Brembos?

Post by GingerMagic »

You can't clear the Brembos without coupe wheels or spacers/offset - both will put a small strain on the bearings.

The difference between Coupe Hoggars and Saloon Hoggars is that there is a small spacer built into the rear of the wheel, and the spokes have a cut-out to clear the brembos.
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
MikeBX16V
1.8 8v
Posts: 49
Joined: Tue Mar 17, 2009 10:23 pm

Re: Which wheels fit saloons with Brembos?

Post by MikeBX16V »

Are the hubs on the coupe the same as on the saloon?

in which case the stress on the saloon with coupe offsets will be no worse than on the coupe normally.

Are there any other effects, other than the wheels sticking out a bit further.
GingerMagic
3.0 24v
Posts: 3579
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: Which wheels fit saloons with Brembos?

Post by GingerMagic »

Hi, yes I think they are the same. I put 16" Starfish on my Estate once and they fitted fine. They did stick out further than standard alloys but still within the arch and the effect was a nice looking ' stance ' .... :cheesy:

I don't think they rubbed....
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
User avatar
Tubthumper
1.8 16v
Posts: 83
Joined: Sun Feb 05, 2012 10:28 am
Location: Bucks.

Re: Which wheels fit saloons with Brembos?

Post by Tubthumper »

GingerMagic wrote:Hi, yes I think they are the same. I put 16" Starfish on my Estate once and they fitted fine. They did stick out further than standard alloys but still within the arch and the effect was a nice looking ' stance ' .... :cheesy:
Don't suppose you've got any pics, as I'm after some different wheels for mine and wondered what the Starfish's would look like ?
2000 HDI 90 Rapier estate.
GingerMagic
3.0 24v
Posts: 3579
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: Which wheels fit saloons with Brembos?

Post by GingerMagic »

As requested.... :cheesy:
IMAG0537.jpg
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
gumby6371
3.0 24v
Posts: 1638
Joined: Thu Jan 28, 2010 9:01 pm
Location: Telford

Re: Which wheels fit saloons with Brembos?

Post by gumby6371 »

I'm running starfish wheels on my saloon which clear the brembo calipers nicely and I personally like them on the saloon.

If you run 205 55 16 tyres they are a pretty common size (Mondingo etc) and reasonably priced, unlike the 215's the coupe has which are not a common size and therefore silly prices.

I can grab some pics of my saloon if needed.
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
pug406nz
1.8 16v
Posts: 93
Joined: Thu Jul 25, 2013 8:01 am

Re: Which wheels fit saloons with Brembos?

Post by pug406nz »

Or just get some aftermarket 17's which clear them and tyres become even cheaper :) 215/45/17 common as hell.
User avatar
Tubthumper
1.8 16v
Posts: 83
Joined: Sun Feb 05, 2012 10:28 am
Location: Bucks.

Re: Which wheels fit saloons with Brembos?

Post by Tubthumper »

GingerMagic wrote:As requested.... :cheesy:
Cheers Ginger , they actually suit the estate quite well.
2000 HDI 90 Rapier estate.
MikeBX16V
1.8 8v
Posts: 49
Joined: Tue Mar 17, 2009 10:23 pm

Re: Which wheels fit saloons with Brembos?

Post by MikeBX16V »

Thanks for that guys.

Looks like coupe wheels and 205 55 16 tyres is the way to go.

Given the lunar road conditions around here, I don't want to go below 55 profile.

It's strange Peugeot did not put Brembos on the saloon, as it is a bit heavier than the coupe and can carry five passengers.

I tow a small camping trailer on French motorways, so at 80mph fully laden, I would like the extra braking ability.

Mike
Post Reply