406oc.co.uk

anyone know if 206 wheels will fit on 306.

spotted these,

ithink there 17" vortex was there any other pugs other than 206 that had the vortex ?

I always liked the cyclones on the 306.

grasmere59 wrote:I always liked the cyclones on the 306.

cyclones look alright but ican only find 15" one's.

The offset won't be quite right, ET is 25 on a 206, 15 on a 306.

If you wanted to fit 306 wheels on a 206, you could use spacers. You'll probably get rubbing by putting 206 wheels on a 306.

KozmoNaut wrote:The offset won't be quite right, ET is 25 on a 206, 15 on a 306.

If you wanted to fit 306 wheels on a 206, you could use spacers. You'll probably get rubbing by putting 206 wheels on a 306.

Thanks.

Cyclones were only ever 15", Lions look the same or similar and are 17" but very rare.

Cheers
ive looked all over for Cyclones, bigger than 15s. n all

spotted some wheels on a 307 in the local breakers yard iwill try one on see if they fit,

The cyclones, dont luck much differnt /better to the standard lazer wheels whats on now,
so not much point getting a set of 15' them, shame they didnt make them in atleast 16s

i think you need 5mm spacers but i may be wrong have a look on pug306.net or 306oc

madmadmax wrote:i think you need 5mm spacers but i may be wrong have a look on pug306.net or 306oc

Thanks,

any ideas where to get spacers,?

The ones on a 307 are challengers, look the same but are a bit narrower, don't have solid centres and the offset is different, I have a set in the shed waiting for a refurb and tyres!

Cheers,

just been and had alook at the 307 wheels in the Scrapyard,
one of them was Mangled on the inside,

he still wanted a 1ner for them so left them there, by the time theyve been refurd and tyred up it wouidnt be worth it,