heated seats fuse number/location 2003 rapier hdi

[GingerMagic]

No, sorry.

My executive donor obviously has a different loom to your car and my GLX.

Scroll down to 'upload attachment' and browse for the picture, upload it and then insert it into the reply box.

[mundy1989]

Here is the under bonnet fuse box

IMG_20150105_213434344.jpg

[mundy1989]

Here is the in car fusebox

IMG_20150105_220103823.jpg

[mundy1989]

Another pic

IMG_20150105_220108086.jpg

[mundy1989]

This is all the switches do, that's if the sidelights are on

IMG_20150105_220241938.jpg

[GingerMagic]

I don't really want to state the obvious, but have you tried to power to the brown plug with the engine running......

My donor exec has an extra piece of loom towards the back of the engine fusebox in the first picture, but my GLX is identical to yours i.e.no extra loom or relays. I haven't got mine working yet but I'll look at the BSI in daylight to see what spaces are there.

[steve_earwig]

Yeah, the lights in my switches did that, it's a different circuit so it's meaningless.

[mundy1989]

I did try, can the heater elements be hardwired ie live feed from battery to the brown plug?

[GingerMagic]

I asked Mark W the same question a while ago, and here is his reply..

'As regards the engine running relay, if you can't get one installed, just opt for the slightly less elegant solution of having the heaters fed from an ignition controlled supply. The elements consume about 4A each and the idea of having them controlled by an engine running relay is to prevent them being on with engine off (obviously!(sic)).

Put them on an ignition feed instead....you're hardly likely to sit in the car with just the ignition on and the heaters switched on.....
You can switch the individual heater loads directly with the seat heater switches, no relay needed there. That's what they do anyway (switch the full load), it's just the engine running relay that supplies them.'

Does this help?

[grasmere59]

Could you use something like this http://www.ebay.co.uk/itm/30-AMP-SELF-S ... 23396a2978 , It will only give power when the engine and charging is running and cut out when the engine stops.

[mundy1989]

I have wired them direct to battery with a good earth still no good, I'm assuming the elements have both had it,

[steve_earwig]

oh bugger

[mundy1989]

Hopefully the right way round using yellow/green as earth

[mundy1989]

I'll wait until we get an executive in at work and have the fronts out