Squeaky seats

Talk about whats Hot or Not in your 406. Fitting Leather? New Steering Wheel? Changed the pedals? Ask and tell in here!

Moderator: Moderators

Post Reply
markj2210
1.6 8v
Posts: 18
Joined: Thu Jan 10, 2008 10:48 am

Squeaky seats

Post by markj2210 »

Working through the minor faults on my 53 plate 406 HDi, i'm now on the seats.

They squeaked like a bitch when I moved my legs to operate the pedals, drove me nuts so I checked the bolts and they were all a bit loose, especially the two on the rear of the seat.

The front passenger seat was the same so I tightened them all up and all was silent. Felt wicked, for about two weeks until the driver seat started doing it again.

Is this a common thing or could a previous owner have been messing about with them?

If I find they are loose again, is there a way to do the job permanently, I thought about using spring washers?
I'm not sure if they screw straight into the floor or whether there is anything I can change to get them really tight.

I other thing. The plastic bits aroung the stereo creak badly when they expand from cold. Any way to stop this without replacing them?

I know i'm fussy but I do alot of miles and it drives me mad.

Thanks for any info

Mark
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Squeaky seats

Post by steve_earwig »

Try thread lock on the screws, I have a feeling they should have had this on them already.

You could try something like rubber and nylon lubricant on the plastic trim. I wishI could stop my door panels from creaking...
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Re: Squeaky seats

Post by mjb »

Could try some threadlocker on the seat screws?
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
markj2210
1.6 8v
Posts: 18
Joined: Thu Jan 10, 2008 10:48 am

Re: Squeaky seats

Post by markj2210 »

I'll try some locknut.

Dint know you could get nylon/rubber lubricant. Would you get that from Halfords or somewhere like that?

Not noticed the doors. Youve started me off again now. haha
djp30djp
2.2 16v
Posts: 237
Joined: Sun Dec 30, 2007 4:47 pm
Location: Cark, Cumbria, England

Re: Squeaky seats

Post by djp30djp »

steve_earwig wrote:Try thread lock on the screws, I have a feeling they should have had this on them already.

You could try something like rubber and nylon lubricant on the plastic trim. I wishI could stop my door panels from creaking...
The headlining creaks on mine, just above my head, next to to moonroof.
406 HDI Exec Estate (2 off) & 307CC HDI Cabriolet
mbell666
3.0 24v
Posts: 642
Joined: Mon Aug 08, 2005 10:11 pm
Location: Cambridge

Re: Squeaky seats

Post by mbell666 »

While clean my car a little while after i got it i noticed that 3 or 4 of the bolts for the front seats where about half way out on mine. I ve not checked them in a year or so maybe i should...
1997 Honda Prelude 2.2 VTi
Previously - 1999 406 Executive HDI
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: Squeaky seats

Post by Welly »

My front seats squeek, BUT it's coming from the seat belt catches. very tiny movementsin there as the car moves causes a little squeek which I eventually found to be the seat belt catch.

I solved it by driving without the seat belts.


(only joking :P )

Actually I daren't squirt any lubrication down the catch in case something happens (pre tentioners, air bag etc) :|
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
FarmerPug
2.0 HDI 110
Posts: 9656
Joined: Tue Jun 01, 2010 5:42 pm
Location: The Countryside, Northern Ireland
Contact:

Re: Squeaky seats

Post by FarmerPug »

If the seats are leather get some leather softner cream, leather seats need softened or they squeak or so the salesperson told me.
Post Reply