406oc.co.uk

first ov all you will need these few things . (all the wires are allready on your car.)

1. a set of front fog lights (do not forget the "L" shape bracket from the donor car)
2. a indicator stalk with front fog controll .
3. a relay (this is located under the steering wheel behind the fusebox (look right under)
4. x2 10amp fuses (usually these are all ready in ready) check engine bay fuses 12 & 13




Note. there is allready a relay in the relay panel under the steering wheel but you need to add a 2nd one,
the pink and orange arrow shows were both relays need to be. dont forget you only need 1 relay from the donor car because your car will allready have one fitted _ the one allready fitted controlls the rear fog lights.
also note that your relay panel may only have 2 slots and not 4 like in the picture below. dont worry about that .



FITTING
replace your stalk with the new one that has front fog controll. insert the relay under the steering wheel . put the fogs in the bumper - when you put the fogs in the bumper you will see the plug tied up . simply plug it onto your fog and bobs your uncle, job done. its that easy

PS dont forget to check fuses 12 & 13 in the engine bay fuse box beside the battery

If your unsure or need any more help just send me a message or ask on the forum

Even the front fog logo is on your speedo clocks. bulb is allready there so you know when they are switched on

this



but its green on your speedo clocks

Before you fit the fog lights into the front bumper you need to remore the fog light blanking plates.

1 bolt and a few clips is all that holds them on

for even more info on this visit this post

viewtopic.php?f=28&t=13848

Top guide mate

Thanks. ive also added your post into it as well. i didnt want to intrude your work by making it look like my own

hopefully it will help others . because i wanted fogs for 2 years and always thought i would have had to retro fit with my own wires and switches.

its only from you making your original post that made me do it .

I'm pleased its turned out to be a fairly straight forward mod

I'm fitting mine for more athstetic reasons (if thats the word) more than for use, I always assume if a car has front fogs its well specced for some reason and it looks nicer at the front, I probably won't use than more than a handfull of times a year, I know its a mot fail to have them fitted and not wired up

Roylewaa wrote:I'm pleased its turned out to be a fairly straight forward mod

I'm fitting mine for more athstetic reasons (if thats the word) more than for use, I always assume if a car has front fogs its well specced for some reason and it looks nicer at the front, I probably won't use than more than a handfull of times a year, I know its a mot fail to have them fitted and not wired up

just put black duct tape over them at mot time

My father in law did that on a Scenic he used to have, he bought front fogs but there was no wiring there but he still fitted them

Great job, copying to KB!