Page 1 of 1
Multi Function Panel
Posted: Fri Apr 22, 2011 2:11 pm
by GTXJez
My MF Panel is weaker on the left hand side
I assume that there must be pea bulbs for illumination (same as Omega's) seems easy enough to take the panel out....
Does anyone have a manual that may give me an idea?
Cheers
Re: Multi Function Panel
Posted: Fri Apr 22, 2011 2:26 pm
by lozz
Im Asuming you have got a D9 ?
Multifunction panel ? do you mean MFD ?
if so pop off the 2 corner blanks then you will see 2 little Tx screws behind each blank get them out,
then pull out the Mfd from dash,
on the back of the unit you will see the bulb holders they twist out and the bulb pops out of the holder / s ,.
hope this helps if any
Re: Multi Function Panel
Posted: Fri Apr 22, 2011 2:34 pm
by GTXJez
Hi Lozz
Yes MFD, but not sure what D9 means, mine's a 02 GTX Hpi 2.0? so assume so?
But your description seems spot on, I pulled off one of the blanking plates and could see the screws
Are the pea bulbs standard and easy to get hold of?
Many thanks for your help Lozz

Re: Multi Function Panel
Posted: Fri Apr 22, 2011 2:39 pm
by lozz
D8 has slatted front grille
d9 has honeycomb grille thats a quick way of working out a d8 -d9.
if you need to work out what bulbs you need for the mfd pop out the ashtray the bulb that lights up the ashtray is the same sort of bulbs for the mfd so just take the ashtray bulb into a car shop to show them what you need,
the bulbs are around 20 - 25p each
My ashtray bulb is now lighting up my mfd idont use the ashtray

Re: Multi Function Panel
Posted: Fri Apr 22, 2011 2:41 pm
by GTXJez
Thanks Lozz.... D9 it is
Will do the ashtray trick, thanks for you help mate

Re: Multi Function Panel
Posted: Fri Apr 22, 2011 3:18 pm
by plod
Bulbs are 286T
Don't know on the D9 but on the D8 you need to buy the short versions otherwise the MFD won't fit back in
Re: Multi Function Panel
Posted: Sat Apr 23, 2011 9:57 am
by GTXJez
Cheers Plod!
I have a Pug dealer near me so best to go there first, rather than find they don't fit and spend more in fuel going back and forth

Re: Multi Function Panel
Posted: Mon Apr 25, 2011 9:23 am
by OdinEidolon
You can also buy LED ones on ebay, with diffuse light. just search for 286T.
I bought some, I'll let you know when they get here if they fit or if they are too long.
Also, I bought
a set of ten bulbs for 5£ shipped to Italy. They also have the base, but do not know if it will fit.
Re: Multi Function Panel
Posted: Mon Apr 25, 2011 10:40 am
by GTXJez
Hi OdinEidolon
Thank you for the advice, please let me know how well the new bulbs work?
I will try in England also and let you know.
Re: Multi Function Panel
Posted: Mon Apr 25, 2011 7:11 pm
by OdinEidolon
GTXJez wrote:Hi OdinEidolon
Thank you for the advice, please let me know how well the new bulbs work?
I will try in England also and let you know.
Hi, I will let you know. I presume the new bulbs will be right, I do not see why not. The LEDs will be more interesting to test.